• Electric & Hybrid Full Starter kit. Everything you need to start servicing Electric & Hybrid Vehicles Safely Kit Contents
    • ALBRPK3610-RW - Barrier Chain with Rubber base Posts kit (Red & White)
    • ALBIRP2920 - Insulated Rescue Pole
    • ALBESP7299 - Safety Poster - ELECTRIC SHOCK POSTER
    • ALBHVE7750 - Safety Poster HIGH VOLTAGE ELECTRIC SHOCK
    • ALBRIM2311 - Electrical Insulating Rubber Mat to IEC61111 - 1m x 1m Mat
    • ALBKLS4237 - EHV Lockout Station for Vehicle Keys & Padlocks
    •  ALBLOP7943 - Lockout Safety Padlock - Long Shackle (x2)
    • ALBKLT7050 - Lockout CAR KEY tags for EHV(re-usable)x10 with marker pen
    • ALBLOT4148 - Lockout Padlock tags for EHV(re-usable)x5 with marker pen
    • ALBLNH7942 - Lockout Safety Nylon Hasp - use with tasg &/or SWC
    • ALBSWL4721 - Steering wheel Lockout with Warning Sign
    • ALBSGK6955L - Electrical Safety Glove Kit - Large
    • ALBCUG6915 - Cotton Under gloves x12 pairs
    • ALBEAF8532 - Electric Arc Protector Face Shield Visor - Lightweight
    • ALBFSB8590 - Face Shield Protective Storage Bag
    • ALBA18-LIGHTENING - EHV Electrical safety Boot (sizes 6-9 confirm size)
    • ALBRTP7234 - EHV Roof Top Warning Sign
    • ALBTCS6639 - High Voltage No Admittance Sign Rigid 400 x 300mm
    • ALBIPS7221-HV - Sign ISO Pictogram - High Voltage
    • ALBHVS7561 - High Voltage Re-usable Adhesive Sticker (x10)
    • ALBHVT8049 - High Voltage Vehicle Tags (x10)
    • ALBCES7550 - Insulated Cable Shrouds 18&24mm (x10)
    • ALBMIT4094 - EHV Multimeter with Insulation Test CAT111 to 1000VDC
    • ALBNVP4025 - No Voltage Present Detector - CAT111 Certified
    • ALBSDT4672 - Disconnect Shut Down timer for EV's
    • ALBEVT6150 - Insualted Tool Kit 3/8" Drv 25PCS
    • ALBEVT5515 - Insulated Hex Key Set Extra Long 6PCS VDE Certified
    • ALBEVT7751 - Insulated Star Key Set Extra long 9PCS VDE Certified
    • ALBEVT7885 - Insulated Inspection Mirror 50mm - EN/IEC 60900:2012 1000V
    • ALBEVT7211 - Insulated Magnetic Pick Up Tool
    • ALBEVT7551 - Insulated Trim/Cable mgmt set 4PCS
    • ALBITS1301 - Insulated Transparent Shroud 1000V 1M x 1.3M
    • ALBIPC6025 - Insulated Clamp To secre Shroud Material (x2)
     
  • The barrier chain and 6 post kit is supplied with:
    • 12.5 metres of plastic barrier chain.
    • 6 x Chain Support Posts with fillable bases.
    • 10 x “S” hooks to attach the chain to the posts.
    A simple but effective way to warn of electric and hybrid vehicles in your workshop and highlight prohibited access for non-authorised technicians.
  • Steering Wheel Lockout with integral Warning Sign. A high visibility warning to alert unauthorised personnel that the vehicle is being serviced or repaired, therefore should not be moved or started. The sign is an integral component of the key locked steering wheel immobiliser to prevent unauthorised removal.
    • “Technician in charge” can be inserted on the sign
    • Dry-wipe Marker Pen included
    • Supplied with 2 keys
  • Electric & Hybrid Vehicle combined Danger High Voltage / No Access sign.
    • Inform customers of the dangers, and that access is for authorised personnel only.
    • Printed on a 3mm polymer panel.
    • Size: 300 x 400mm
  • Part no. ALBSGK6955

    Insulated Gloves Set

    The Electrical Safety Glove Kit with Storage Case contains:
    • Cotton Under Gloves (12 pairs)
    • Electrical Gloves –  Insulate to 1,000V Class 0 (1 Pair)
    • Leather Over-Gloves (1 Pair)
    • 1 x Safety Glove Storage Box
    Available in Medium, Large or Extra Large sizes
    • Essential PPE when working on high voltage systems
    • Electrical Gloves – Insulate to 1,000V (Class 0)
    • Cotton under-gloves improve dexterity and user comfort
    • Leather over-gloves protect the rubber insulating gloves from mechanical damage
    • Robust polypropylene storage case to protect gloves
  • Part no. ALBSDT4672

    Disconnect Shut Down Timer

    Disconnect and shut down digital timer used to accurately measure the required shut down period between switching off the ignition and disconnecting or reconnecting the vehicle’s battery etc. Particularly important where airbag, BSI, hybrid and electric vehicle ECU’s need time to shut down before proceeding with further work. Suitable for technicians working on hybrid and battery electric vehicles on a regular basis.
    • Dimensions: 70(H) x 70(W) x 25(D)mm
    • Material: Plastic
    • Weight: 46g
    • Colour: White
    • Rear magnet and fold out stand
    • Large digital display is easy to read at a glance
    • Requires 1x AAA battery (supplied)
  • The Electric Vehicle Roof Top Warning Sign.
    • High visibility warning to all employees of Electric or Hybrid vehicles being present in the workshop.
    • Constructed from durable rigid plastic.
    • Foam protected feet to prevent damage to the vehicle bodywork.
    • Size: 310mm x 235mm x 3 sides.
  • The Red & White barrier chain with rubber base and 6 post kit is supplied with:
    • 12.5 metres of plastic barrier chain.
    • 6 x  Posts with Rubber Bases
    • 10 x “S” hooks to attach the chain to the posts.
    A simple but effective way to warn of high voltage, electric and hybrid vehicles in your workshop and highlight prohibited access for non-authorised technicians.
  • Insulating Rubber Mat 1m Electrical Insulating Rubber Matting is essential for ensuring the safety of technicians whilst working on Electric and Hybrid Vehicles. Manufactured to the international standard IEC 61111 Class 0, offers protection up to 1,000 volts. produced with a ribbed profile giving it an increased surface area, which helps to disperse electrical discharge and offers anti-slip properties. Size: 1m x 1m
  • Part no. ALBNVP4025

    Cat1V High Voltage Tester

    The No Voltage Present Detector is essential equipment for Hybrid and Electric vehicle technicians to prove that there is no voltage present prior to working. A simple LED scale indicates the voltage range present at the time of testing.  An independent ELV indicator shows if >50VAC / 120VDC is present even if there is no battery power to the unit or the main circuit has failed. The NVP4025 No Voltage Present Detector has a safe test range from 12V to 1,000V AC/DC.  Voltage measurement is in increments as follows: 12, 24, 50, 120, 230, 400, 690 & 1,000 Volts. Conforms to the following safety standards:
    • BS EN61243-3
    • TUV-GS38
    • EN61010-1 CAT III – 1,000V
    • EN61010-1 CAT IV – 600V
  • The EHV Multimeter and Insulation Tester is a true RMS multi-meter designed for testing and checking components on electric and hybrid vehicles through the continuity test and diode test. The multimeter function is combined with an inbuilt Insulation Test facility making it ideal for troubleshooting and preventative maintenance. The Insulation test function operates at the following test voltages: 50v, 100v, 250v, 500v and 1000v. The EHV Multimeter and Insulation Tester is supplied with all test leads and clips, temperature probe, manual and batteries. Complies with EN61010 CATEGORY III (1000v) and CATEGORY IV (600v)
  • Our Lockout Tags are designed to be used with Insulated Safety Lockout Padlocks (LOP4540) when securing the Isolation Port (MSD) Lockout Device (FLD4566) or Steering Wheel Warning Cover. Manufactured from gloss laminated polyester to ensure durability and moisture resistance. A 10mm brass eyelet ensures the Lockout Tags cannot be torn off. High visibility warning printed in vibrant colour on one side, with “Technician In Charge” name panel on the reverse. Supplied with a fine point, dry wipe, marker pen for the “Technician In Charge” to identify themselves.  When used with the dry wipe marker the Tags can be reused many times. Dimensions: 140 x 80mm Pack Size: 5 tags with 1 x fine point, dry wipe, marker pen.
  • Lockout Safety Padlock - Long Shackle. Used to prevent unauthorised access and accidental activation of high voltage systems on electric vehicles
    • Non-conductive nylon body.
    • 76mm shackle.
    • Use with lockout key tags.
  • Part no. ALBLNH7942

    Lockout Safety Nylon Hasp

    The Lockout Nylon Hasp allows you to prevent access where standard padlocks are not long enough. Supplied with 6 holes so that multiple padlocks can be used when more than one operative should restrict access.
    • Can be used with lockout tags.
    • Dimensions: 193mm long x 41.5mm wide.
    • Hasp length: 101mm; hole diameters: 10mm.
  • Part no. ALBKLS7050

    Lockout Safety Tags

    Car Key Lockout Tags are manufactured from gloss laminated polyester to ensure durability and moisture resistance. High visibility warning printed in vibrant colour on one side, with “Technician In Charge” name panel on the reverse and space for Vehicle Registration No. Supplied with a fine point, dry wipe, marker pen for the “Technician In Charge” to identify themselves.  When used with the dry wipe marker the Lockout Tags can be reused many times. Dimensions: 50 x 70mm Pack Size: 10 tags with 1 x fine point, dry wipe, marker pen & tie wraps.
  • Part no. ALBKLS4237

    Lockout Management Station

    The Lockout Station securely stores vehicle keys, Isolators (MSD) and Lockout Padlocks. Manufactured from pressed metal plate. Isolators and Padlocks NOT included (sold separately). Dimensions of: 20 x 16 x 7.5cm. Supplied with 2 keys.
  • Transparent Insulating Shroud, certified for safe work up to 1,500VDC.  Should be used to isolate the engine compartment on Electric and Hybrid vehicles to prevent accidental contact with live components
    • Heavy Duty, fireproof PVC
    • Certified to IEC 61112 Class 0 (1,000VAC / 1,500VDC)
    • Dimensions: 1.3m x 1.0m x 0.8mm
  • An electrically insulated rescue pole with hook, 1.45 metres long and rated to 45kV supplied with wall mounting brackets. Designed to safely remove victims of electric shock from danger. Conforms to NF EN 50508.
  • “High voltage” ISO Pictogram denotes a Hazard or Prohibition message without text.
    • Suitable for use throughout Europe.
    • Printed on a durable polymer panel measuring 25 x 20cm
    • Fitted with a durable sucker to allow placement on any smooth surface.
    Save 10% when purchasing the ISO Pictogram Warning Sign Pack of 3 signs – (1 of each design)
  • Insulated Spring Loaded Plastic Clamp for shroud. Spring-loaded plastic clamp for securing engine bay protective shroud.
      • Dimensions: 165 x 82 x 18mm
      • Jaw opening: 25 mm
      • Insulation rating to 1,000 Volts
  • Part no. ALBHVT8049

    High Voltage Vehicle Tags

    High Voltage Vehicle Identification Tags.  Manufactured from lightweight PVC and designed to be deployed on the vehicle rear view mirror or indicator stalk.  Provides a visible warning of potential high voltage danger.
    • Designed to serve as a warning that vehicle is EV or hybrid.
    • Ideal for workshops, or car hire companies to hang inside customer cars.
    • Provides additional safety warning to identify hybrid/EV vehicles.
    • Size: 177 x 66.5mm.
    • Can hang on internal rear view mirror, steering wheel or indicator stalk.
    • Supplied in pack of 10.
     
  • High Voltage Warning Vehicle Stickers - re-useable.  Designed to indicate high voltage areas on an EV, such as charging port, battery, capacitor bank etc.  These reusable vinyl labels have a low-tack adhesive which does not leave residue on the vehicle and enables them to be used many times.
    • Indicates high voltage parts of the vehicle.
    • Label dimensions: 150 x 75mm.
    • Supplied in a pack of 12.
  • Electric Shock First Aid and CPR Advice Polymer Poster.
    • The High Voltage Electric Shock Safety Poster is printed on a durable polymer panel.
    • Displays an easy to follow casualty assessment guide and CPR instructions.
    • Size:  750 x 500mm.
  • Insulated Tool Kit, ½” Drive, VDE Certified for live working up to 1,000V AC / 1,500V DC.  Supplied with 6pt sockets ranging from 10mm - 27mm, hex keys, ratchet wrench, extension bars, adjustable spanner, pliers and screwdrivers.  A comprehensive set of tools to cover most service and repair needs when working on Electric and Hybrid vehicles.
    • 13 x 1/2"Dv. Insulated Socket - 10, 11, 12, 13, 14, 16, 17, 18, 19, 21, 22, 24, 27.
    • 4 x 1/2"Dv. Insulated Hex/Allen Extra Long Socket - 4, 5, 6 and 8mm – 120mm long.
    • 2 x 1/2"Dv. Insulated Extension Bar 125mm and 250mm.
    • 1/2"Dv. Insulated T-handle Wrench 200mm
    • 1/2"Dv. Insulated Reversible Ratchet 250mm
    • Insulated Combination Plier 180mm
    • Insulated Side Cutter 160mm
    • Insulated Snipe/Long Nose Plier 160mm
    • Insulated Adjustable Wrench 200mm
    • 2 x Insulated Screwdriver - Slotted - 4.0x100mm and 5.5x125mm
    • 2 x Insulated Screwdriver – Phillips - PH1x80mm and PH2x100mm
    • VDE/GS certified and IEC60900 approved for safe work up to 1,500 Volts DC.
     
  • Part no. ALBEVT7885

    Insulated Inspection Mirror

    1000v Insulated Inspection Mirror, for use when working on electric vehicles.

    • Ideal for the inspection of High Voltage Cables & Connectors in confined areas. For e.g. such as battery packs, controller & difficult to get to under vehicle areas.
    • Insulated Rubber moulded casing for easier handling.
    • 50mm diameter mirror disc.
    • 170mm handle length.
    • Manufactured from non-conductive materials.
    • Manufactured & Tested to EN/IEC 60900:2012 Standard, for up to 1000V live working.
    • Made in the UK.
  • Part no. ALBEVT7751

    Insulated Torx Key Set 9pc

    9 Piece Insulated STAR / Torx / Torx head Key set – VDE Certified Sizes: T10/T15/T20/T25/T27/T30/T40/T45/T50 Manufactured from S2 steel for strength
  • Insulated Trim and Cable management tool set.  Used to safely remove vehicle trim and clipped components on Electric and Hybrid vehicles.
    • Four profile shapes to assist with removal of various trim clip styles.
    • Tested to 1,000 volts.
    • Supplied with storage pouch.
  • Insulated magnetic pick up tool with long reach, ideal for retrieval of dropped fasteners and small components.
    • Approved for live working up to 1,000Volts.
    • An essential tool for electric vehicle maintenance technicians.
    • Lifting capacity up to 250g.
    • 5mm diameter magnetic head.
    • 420mm long reach with insulated shaft and handle.
     
  • Insulated tool set, for live working up to 1,000V AC / 1,500V DC. Supplied with sockets and Open End Spanners, ranging from 7mm - 22mm.  Also includes; pliers, screwdrivers and a cable knife.
    • 9 x 3/8"D sockets: 7, 8, 10, 12, 14, 15, 17, 19, 22mm. Length: 71mm.
    • 3/8"D 72 teeth ratchet; extension bar 100mm; T-handle.
    • combination pliers 175mm; side cutter 150mm.
    • 6 x Open End Spanners: 7, 8, 10, 12, 14, 17mm.
    • 1 x Cable Knife.
    • 4 x Screwdrivers: Phillips: Ph1 x 100mm, Ph2 x 100mm; Flat: 5.5 x 125mm, 4 x 100mm.
    • VDE/GS certified and IEC60900 approved for safe work up to 1,500 Volts DC.
  • Part no. ALBEVT5515

    Insulated Hex Key Set 6pc

    6 Piece Insulated Hex key set Extra Long (VDE Certified) tested to 1000volt. Sizes: 2.5mm/3mm/4mm/5mm/6mm/8mm.
  • This poster gives basic advice on what to do in an emergency when someone has an electric shock. Printed on a flexible PVC panel, to ensure good moisture and dirt resistance. Suitable for use in any workplace.
  • Part no. ALBA18-Lightening

    Electric EV Safety Work Boots

    High voltage is now a critical factor in personal safety due to the latest generation of electric and hybrid vehicles. The safety boot is fully compliant and fully electrically insulated. They meet all UK and EU requirements for safety footwear, along with international standards for high voltage (1000v). Size: UK 6-14 (Whole Sizes)
  • Part no. ALBEAF8532

    Arc Flash Face Shield

    • A robust, heavy-duty, helmet mounted face shield with hearing protection compatibility. Polycarbonate browguard with ratchet headband. Full wrap-around visor. Conforms to: EN 166 B 3.9
  • Part no. ALBCUG6915

    Cotton Liner Gloves

    • Cotton Under Gloves should be worn underneath the Electrical Insulating Gloves to improve comfort and hygiene. The use of the cotton under gloves also improves the fit of the safety gloves and improves dexterity.
  • Part no. ALBCES7550

    Insulated Cable End Shrouds

    Insulated Cable End Shrouds for Electric and Hybrid vehicles.  Used to insulate and protect cable terminal ends during component replacement.  Specially moulded to incorporate a self-grip collar. Supplied in a pack of 10 sleeves, 5 of each two sizes. 5 of 18mm OD x 14mm ID x 100mm long 5 of 24mm OD x 20mm ID x 100mm long  
  • Pressure bleeding is the only method approved by brake manufacturers
    • Full fluid change can be completed by a single operator in approx. 15 minutes
    • Heavy duty pump for longer life & continuous use
    • Fully adjustable analogue pressure regulator, 0.5-4.0 bar
    • No compressed air used, therefore no possibility of contamination of the fluid
    • Storage facility for fluid collection container & accessories (ALB30654B Cap kit)
    • Suitable for use on Car & LCV brake systems & also on HGV clutches
    • 6L fluid change capacity
    • 220V/240V 50HZ/60HZ mains operated
    • Stainless steel construction
    • Full fluid change can be completed by a single operator in approx. 15 minutes
    • Fully adjustable pressure regulator 0 – 3.0 bar
    • Draws fluid direct from 5L container
    • Auto cut-off prevents air entering system if fluid supply is interrupted
    • Portable unit with carry handle – only 9.0kg
    • 220V/240V 50HZ/60HZ mains operated
    • Heavy duty pump for long life
    • Coiled brake fluid delivery hose for ease of use and storage
    • Supplied complete with ALB30564B; multi-vehicle cap and European cap kit
    • OEM approved
    • To treat burns caused by heat and electric arc
    • Includes antidote gel for Hydrofluoric Acid exposure
    • Supplied with integral wall mount bracket
    • Prevents damage to the Face Shield visor
    • High voltage protection up to 20,000V
    • Approved to European standards
    • Fuel and oil resistant rubber sole
    • Heavy duty dielectric face shield
    • Full wrap-around visor
    • Polycarbonate brow guard
    • Ratchet adjustable headband
    • Conforms to EN166B3.9
    • Essential PPE when working on high voltage systems
    • Class 0 rated rubber insulating gloves for safe use up to 1,000V
    • Cotton under-gloves improve dexterity and user comfort
    • Leather over-gloves protect the rubber insulating gloves from mechanical damage
    • Robust polypropylene storage case to protect gloves
    • Detect the invisible inside parts of machinery (such as cars) to check whether it is working normally.
  • Part no. ALB40318

    Lugdriller

    • Removes the most difficult locking lug nuts • Professional kit : made of solid material that can work on the hardest lugs • Very easy and quick to use : takes less than 10 minutes.  
  • This extractor allows the user dismantle Common rail or Piezo injector types for Denso, Siemens, Bosch & Delphi brands from 1999 to 2017.
  • Part no. ALB40316

    Hub Cleaner Plastic

    • Plastic bell 1/2" sq dr - for use with pneumatic impact wrenches
    • Corrosion between the wheel rim and the wheel hub is removed effectively
    • Torque valves no longer distorted by a build up of corrosion
    • Complete with 1 abrasive cleaning disc - 150mm diameter
  • Part no. ALB40315

    Disposable Visors

    • Non-medical
    • Disposable Visor Specifications:
    •  One size fits all
    • Head size 49cm to 64cm
    • Screen dimensions 16.7cm x 21cm
    • Cardboard headpiece – fully recyclable – 500um white folding box-board
    • Anti-mist film – 71um poly
  • Part no. KN-95

    KN-95 Mask

    • FFP2 KN95 Mask (25 box)
    • Filtration effy>95%

Go to Top