• Part no. ALB40302

    0-25mm Micrometer

    • Range: 0-25mm
    • Display Type: Non-Digital
    • Carbide Measuring Faces
    • Clear Graduations on satin chrome finish
    • Hammerstone baked enamel finish
    • Ratchet Stop
    • Supplied in fitted plastic case
    • Made from sturdy moulded plastic
    • 17L capacity
    • Handy spout for emptying
    • Made from sturdy moulded plastic
    • 17L capacity
    • Handy spout for emptying
    • Sturdy moulded plastic - fits directly on to 200L waste oil barrel
    • 20L capacity
    • Built-in empty directly into a 200 litre barrel
  • Part no. ALB40305

    25-50mm Micrometer

    • Range: 25-50mm
    • Display Type: Non-Digital
    • Carbide Measuring Faces
    • Clear Graduations on satin chrome finish
    • Hammertone baked enamel finish
    • Ratchet stop
    • When the reference rod is used as the measured workpiece, the "0" position can be corrected Supplied in fitted plastic case
  • Part no. ALB30960

    4 Row Wire Brush

    • Wooden handle with steel brush fill
    • Suitable for general purpose applications
    • Fill pattern: 4 rows of 14 bristles
  • Part no. ALB40253

    ABS Sensor Reamer Set

    • A specifically designed reamer set with 1/4” diameter ratchet, complete with 5 popular sized reamers
    • Chrome Vanadium and HSS steel
    • Removes dirt, dust & rust, ensuring a perfect fit
    • For:  VW/Audi/BMW/Fiat/Skoda/Seat/MB/Mazda/Ford/Toyota
  •   • Will easily remove even the toughest grime from brake discs, linings & calipers • Removable filter to recycle waste water/detergent; recycle function prolongs life of the brake          cleaning fluid • Tank capacity 40Ltrs • Fluid level indicator • Large diameter drain pan & removable filter grid • Adjustable offset telescope support arm (1260mm – 1420mm) for use under or adjacent to vehicle lifts • Heavy duty replaceable nylon brushes (offset & straight brushes)
  • Use with ALB30844
    • Winds back brake caliper pistons to replace brake pads
    • Fits most European & Japanese cars
    • Magnetic pad holds adaptors in place
    • Tool for both left and right handed threaded pistons
    • Set includes 15 popular adaptors
  • Part no. ALB30771

    Airvac Coolant Refiller

    • Fast & efficient refilling system with universal adaptor
    • Fits most radiator & header tanks due to unique cone adaptor
    • Integrated vacuum gauge
    • Eliminates bleeding, coolant spillage & wastage
    • Operates on shop air to generate full system vacuum and eliminate air locks
    • Helps the technician test the integrity of EGR valves and other 12v solenoids and helps in the cleaning process for carbonised EGR valves
    • Variable frequency allows EGR valves to be cycled in low frequency mode, to ensure correct operation or to clean during the cyclic mode
    • In high frequency mode, the valve can be opened progressively, allowing more efficient manual cleaning
    • Because of the variable frequency feature, the tool can also be used to test a variety of other 12v solenoid type valves
    • 12v operated
    • Rotary frequency control
      Kit contents: EGR & solenoid valve tester, universal terminals for 1.5mm valve connection pins, universal terminals for 2.8mm valve connection pins, Dedicated 6 pin connector for Pierburg/Renault/GM/Nissan and Volvo Dedicated 5 pin connector for GM/Opel applications & dedicated 6 pin connector for Ford/Land Rover and Jaguar applications.  
  • Part no. WF70-P

    Alba Safety Boot

    • Suede upper
    • Steel toe cap
    • Dual density polyurethane sole
    • Penetration resistant midsole
    • Oil resistant sole
    • Sizes 8-11 in stock, other sizes available to order
  • Part no. WF80-P

    Alba Safety Trainer

    • Suede upper
    • Steel toe cap
    • Dual density polyurethane sole
    • Penetration resistant midsole
    • Oil resistant sole
    • Sizes: 8-11 in stock, other sizes available to order
    • Special set of spline & torx socket bits for the removal of free-wheel alternator pulleys
    • Allows simple removal and installation of free-wheel alternator pulleys: on or off the vehicle
    • Permits alternator, allowing the central locking bolt of the pulley to be released
    • Can be used with hand tools or impact gun
    • Fits most alternators by using interchangeable adaptors; including VW, Audi, Seat, Mercedes, Renault, BMW, Ford, Renault, Fiat etc.
  • 0.5-4.0 BAR, 6 LITRE, 12V

    Pressure bleeding is the only method approved by brake manufacturers
    • Full fluid change can be completed by a single operator in approx. 15 minutes
    • Heavy duty pump for longer life & continuous use
    • Fully adjustable analogue pressure regulator, 0.5-4.0 bar
    • No compressed air used, therefore no possibility of contamination of the fluid
    • Storage facility for fluid collection container & accessories (ALB30654B Cap kit)
    • Suitable for use on Car & LCV brake systems & also on HGV clutches
    • 6L fluid change capacity
    • Operates off 12V supply (vehicle battery)
    • Stainless steel construction
     
  • Pressure bleeding is the only method approved by brake manufacturers
    • Full fluid change can be completed by a single operator in approx. 15 minutes
    • Heavy duty pump for longer life & continuous use
    • Fully adjustable analogue pressure regulator, 0.5-4.0 bar
    • No compressed air used, therefore no possibility of contamination of the fluid
    • Storage facility for fluid collection container & accessories (ALB30654B Cap kit)
    • Suitable for use on Car & LCV brake systems & also on HGV clutches
    • 6L fluid change capacity
    • 220V/240V 50HZ/60HZ mains operated
    • Stainless steel construction
  • Part no. ALBEAF8532

    Arc Flash Face Shield

    • A robust, heavy-duty, helmet mounted face shield with hearing protection compatibility. Polycarbonate browguard with ratchet headband. Full wrap-around visor. Conforms to: EN 166 B 3.9
  • Part no. ALB40100

    Asian Cap Adaptor Set

    • Set of 5 specialist Brake master cylinder caps for Asian vehicles
    Contents:
    • ALB560-11 (Applications: Nissan Qashquai 2009-, Primera, Radius, X-Trail, Renault Koleos
    • ALB40014 (Applications: Nisan Pixo 2009-, Suzuki Alto / SX4)
    • ALB40015 (Applications: Nissan Micra 2011-, Nissan Kubistar, Cabstar, Irvan)
    • ALB560-12 (Applications: Ford Escape / Kuga)
    • ALB30644B (Applications: Standard E20 thread Euro Cap with swivel elbow)
    • Current Clamp – 400AMPS
    • Compatible with graphing meters, scopes & DMM’s
    • Can be used for testing starting & charging systems
    • Auto power off & low battery indication
    • Test Ranges: AC Amps 0-40A, 400A (resolution 0.1A)and DC Amps 0-40A, 400A (resolution 0.1A)
    • Current clamp- 80Amps
    • Compatible with graphic meters. scopes and DMM's
    • Ideal for parasitic drain testing
    • Use for diagnostic analysis to generate current waveforms e.g. primary ignition coils, fuel injectors, fuel pumps, etc
    • 13mm jaw opening, clamps over most negative battery cables
    • Auto power off & low battery indication
    • AC Amps 0-20A, 80A (resolution 0.01A, for parasitic drain testing)
    • DC Amps 0-20A, 80A (resolution 0.01A, for parasitic drain testing)
    • Compatible with graphing meters, scopes & DMM’s
    • Can be used for testing starting & charging systems
    • Zero adjust control
    • Jaw opening 54mm
    Test Range AC Amps 0-600A, or 0 - 1000A (resolution 0.1A) DC Amps 0-600A, or 0 - 1000A (resolution 0.1A)
    •  CAT 111 1000v rated – safe to use on Hybrids
    • Unique plug-in IR thermometer attachment, with 8:1 distance ratio, range from -30 to +550
    • 48 Test Ranges, 18 Test functions
    • 1 Ms Peak Min/Max function for glitch capture
    •  Ms Pulse width for fuel injector on-time
    • 20 Amp Fused Test Range
    • Data Hold, Auto power Off +/- Trigger adjust
    • Also measures temp via K-type thermocouple
    • Waterproof to IP67 standards
    • Continuity: audible beep
    • Diode test
    • Backlit LCD display with 40 segment analogue bargraph
    • Hard storage case with protective holster for multimeter
  • Part no. ALB30933

    Automotive Relay Tester

    • Quickly tests 4 and 5 pin electro mechanical relays used on most cars • Checks for consistent functioning of relay contacts • Coil test voltage 9 volts • Automatically indicates test results with a series of red and green performance lights • 12v power supply required
  • Relay Tester for 4/5 pin relays (ALB30933)
    • Supplied with 2PCS adaptor set (ALB40212) to increase the range coverage of your existing relay tester
    • Supplied with 3PCS set of adaptors for shielded relays (ALB40213)
    ALB30933 Automotive Relay Tester
    • Quickly tests 4 & 5 pin electro-mechanical relays used on most cars
    • Checks for consistent functioning of relay contacts
    • Automatically indicates test results with a series of red & green performance lights
    • 12V power supply required
    ALB40212 Relay Adaptor Set 2PCS
    • Set of two adaptors to increase the range coverage of an existing relay tester
    • The adaptor plugs into the relay tester & the relay to be tested then plugs into the appropriate adaptor
    • For 4 & 5 pin relays as commonly used for fuel pumps & other powered components
    ALB40213 Relay Adaptor Set 2PCS
    • Set of three adaptors which allow an existing relay tester to test shielded relays
    • The shielded relay adaptor plugs into the same pin sockets as the normal relay & the shielded relay then plugs into the adaptor
    • Fits in any of the three 4 & 5 pin sockets on your relay tester
    • Detect the invisible inside parts of machinery (such as cars) to check whether it is working normally.
  • Part no. ALB40256

    Brake Adjustment Levers

    • For use on hydraulic brake systems
    • To adjust clearance between shoe & brake drum
    • For collection of brake fluid from the bleed nipples when bleeding brake systems
    • Chain to attach to Hub assembly, 300mm bleed hose with Universal bleed nipple connector
    • Allows for activating the bleed screws on the rear axles without removing the wheels
    • The open design of the wrench enables feeding through a silicon tube, e.g in a bleeding pump
    • Specially designed for VAG applications
    • Includes: 1x ratchet wrench 150mm with angled head, fine-tooth and reversible, 1 x bleed key SW11mm hex, 20mm short (VW Passat, Audi A4 etc) & 1 x bleed key SW11mmhex, 65mm long (VW Golf, Audi A3, Seat, Skoda etc).
    • An essential tool to retract caliper pistons prior to fitting new brake pads
    • Can be used with Tommy bar supplied or 1/2" square drive
    • Steel spreader plates open to maximum 65mm
    • Suitable for most calipers
    • Brake pad spreader for use when servicing brakes
    • Single handed operation
    • Suitable for cars & light commercials
    • Spring loaded, quick release action
    • 5-60mm spread
  • Part no. ALB40230

    Brake Caliper Service Kit

    Set of specialised tools for caliper servicing:
    • Caliper cleaning file
    • Wire brush
    • 7 & 8mm caliper hex wrenches
    • 4 & 6mm parallel pin punches
    • 14 & 19mm pentagon caliper sockets
    • 10mm pentagon caliper bit
    • Brake pad lining gauge set
    Supplied in metal tin with foam insert
  • Part no. ALB40254

    Brake Cylinder Hone Kit

    • Four cylinder-honing tools in one kit covering 18- 89mm cylinder bore
    • For honing and de-glazing car brake & clutch cylinders
    • Adjustable honing pressure & flexible drive shaft
    • Designed to measure the thickness of the brake discs, with the wheels still on the vehicle
    • Saves time – no need to remove the wheels or strip the brake first
    • Fits easily to most existing vernier calipers
  • • Ideal for use on all fuel supply lines to stop the flow of fuel after disconnection
    • Suitable for use on flexi and solid fuel lines
    • Fits: 3/8”, 5/16”, 1/2” & Steel Banjo
  • Part no. ALB1000, ALB1100, ALB1150, ALB1200, ALB1250, ALB1200BT

    Brake Fluid Tester

    The World's Number 1 Brake Fluid Tester THE SILENT KILLER Brake fluid is designed with a high boiling point to withstand the extreme temperatures generated during braking. It has one major drawback - it absorbs moisture (it's Hygroscopic). The more moisture in the brake fluid, the lower the boiling point. This increases the risk of "brake fade": under heavy driving conditions the brake fluid boils, turns to vapour, and the brake pedal goes right to the floor with no braking action. This is known as "vapour lock". That's why brake fluid is known as the "silent killer". It's a safety critical item, but how many drivers ever ask to get their brake fluid checked? A brake fluid test could potentially save them from accidents, and for the garage, it's a largely ignored service opportunity. The Alba patented brake fluid tester is approved, recommended and sold by the world's leading Brake System & Brake Fluid manufacturers, as well as leading global aftermarket brands. The Alba Brake Fluid Tester works on the boiling point method; the only industry approved method that guarantees reliable, repeatable and accurate test results.
    Model Part No.MAx TempPrinter Enabled
    ALB1000200°C / 392°FNo
    ALB1100320°C / 608°FNo
    ALB1150320°C / 608°FStandard
    ALB1200320°C / 608°FStandard Included
    ALB1250320°C / 608°FBluetooth
    ALB1200BT320°C / 608°FBluetooth Included
    • Ideal for quickly checking remaining life of brake pad friction material
    • The blade is inserted between brake disc & brake pad
    • Sizes: Red 2 & 3mm; Yellow 4, 5 & 6mm; Green 8, 10 & 12mm
    • For forming bends in brake & clutch pipe
    • For 4.75mm (3/16") & 6.00mm (1/4") diameter brake pipe
    • Ideal for use on vehicle or in restricted space
    • For forming bends in brake & clutch pipe
    • For 4.75mm (3/16") diameter brake pipe
    • Ideal for use on vehicle or in restricted space
  • Part no. ALB30746

    Brake Pipe Deburring Tool

    • For effectively de-burring brake pipes before fitting
    • Suitable for both inside & outside de-burring range
    • Pipe diameter range: 3/16” – 1 ½” OD
  • Part no. ALB40068, ALB40069, ALB40070

    Brake Pipe Ratchet with Flex Head 8mm

    • Ideal for use on brake pipe fittings
    • Flexi-head for tight areas
    • Unique lock on wrench head ensures wrench won't slip off when in use
    • Manufactured from Chrome Vanadium steel
    ALB40068- Brake Pipe Ratchet with Flex Head 8mm ALB40069- Brake Pipe Ratchet with Flex Head 10mm ALB40070- Brake Pipe Ratchet with Flex Head 11mm
    • Helps reduce pressure on the knees when working in kneeling position on a workshop floor
    • Washable, insulated & protects the operators knees from cold, hard, damp conditions, as commonly found  on workshop floors
    • Has an integral carrying handle, which can be used to hang the knee pad after use
    • Size: 480 x 320 x 35mm thick
    • Set of 6 rewind adaptors specifically for BMW/Mini models
    • For use with any 3/8" Sq Dr caliper rewind tool (air or manual)
    • Can be used with ALB30990, ALB30845, ALB30728, and ALB30783
    • Designed to aid installation of brake shoe springs
  • Part no. ALB40228

    Brake Shoe Spring Pliers

    • Designed to aid the installation of brake shoe/brake drum springs
    • Suitable for most car and LCV applications
    • Length: 345mm
  • Part no. ALB40224

    Bush Sleeve Kit

    • Universal set of sleeves for removing and installing bushes, bearings etc
    • For use in conjunction with bearing press support block ( eg ALB40097 or equivalent) & workshop press
    • Standard universal applications: car, HGV, LCV
    • 20 bush sleeves - ID range: 34.5 - 72.5mm, OD range: 43.5 - 82.5mm
    • Adaptor plate for use with press block
    • Made of brass wire
    • Required on aluminium brake callipers to remove brake dust
    • Also suitable for cleaning work on all sensitive, metallic surfaces
    • Edge size 90 x 22mm, hook hole
    • Made of steel wire
    • Edge size 90 x 22mm, hook hole
    • Made of brass / steel wire
    • Brass cleaning brush required on aluminium brake callipers to remove brake dust
    • Also suitable for cleaning work on all sensitive, metallic surfaces
    • Edge size 90 x 22mm, hook hole
    • For removal of brake dust that has become firmly burnt onto brake callipers
    • Narrow file that is milled on 2 sides

Go to Top