• Part no. ALB40302

    0-25mm Micrometer

    • Range: 0-25mm
    • Display Type: Non-Digital
    • Carbide Measuring Faces
    • Clear Graduations on satin chrome finish
    • Hammerstone baked enamel finish
    • Ratchet Stop
    • Supplied in fitted plastic case
    • Made from sturdy moulded plastic
    • 17L capacity
    • Handy spout for emptying
    • Made from sturdy moulded plastic
    • 17L capacity
    • Handy spout for emptying
    • Sturdy moulded plastic - fits directly on to 200L waste oil barrel
    • 20L capacity
    • Built-in empty directly into a 200 litre barrel
  • Part no. ALB40305

    25-50mm Micrometer

    • Range: 25-50mm
    • Display Type: Non-Digital
    • Carbide Measuring Faces
    • Clear Graduations on satin chrome finish
    • Hammertone baked enamel finish
    • Ratchet stop
    • When the reference rod is used as the measured workpiece, the "0" position can be corrected Supplied in fitted plastic case
  • Part no. ALB30960

    4 Row Wire Brush

    • Wooden handle with steel brush fill
    • Suitable for general purpose applications
    • Fill pattern: 4 rows of 14 bristles
  • Part no. ALB40253

    ABS Sensor Reamer Set

    • A specifically designed reamer set with 1/4” diameter ratchet, complete with 5 popular sized reamers
    • Chrome Vanadium and HSS steel
    • Removes dirt, dust & rust, ensuring a perfect fit
    • For:  VW/Audi/BMW/Fiat/Skoda/Seat/MB/Mazda/Ford/Toyota
  •   • Will easily remove even the toughest grime from brake discs, linings & calipers • Removable filter to recycle waste water/detergent; recycle function prolongs life of the brake          cleaning fluid • Tank capacity 40Ltrs • Fluid level indicator • Large diameter drain pan & removable filter grid • Adjustable offset telescope support arm (1260mm – 1420mm) for use under or adjacent to vehicle lifts • Heavy duty replaceable nylon brushes (offset & straight brushes)
  • Use with ALB30844
    • Winds back brake caliper pistons to replace brake pads
    • Fits most European & Japanese cars
    • Magnetic pad holds adaptors in place
    • Tool for both left and right handed threaded pistons
    • Set includes 15 popular adaptors
  • Part no. ALB30771

    Airvac Coolant Refiller

    • Fast & efficient refilling system with universal adaptor
    • Fits most radiator & header tanks due to unique cone adaptor
    • Integrated vacuum gauge
    • Eliminates bleeding, coolant spillage & wastage
    • Operates on shop air to generate full system vacuum and eliminate air locks
    • Helps the technician test the integrity of EGR valves and other 12v solenoids and helps in the cleaning process for carbonised EGR valves
    • Variable frequency allows EGR valves to be cycled in low frequency mode, to ensure correct operation or to clean during the cyclic mode
    • In high frequency mode, the valve can be opened progressively, allowing more efficient manual cleaning
    • Because of the variable frequency feature, the tool can also be used to test a variety of other 12v solenoid type valves
    • 12v operated
    • Rotary frequency control
      Kit contents: EGR & solenoid valve tester, universal terminals for 1.5mm valve connection pins, universal terminals for 2.8mm valve connection pins, Dedicated 6 pin connector for Pierburg/Renault/GM/Nissan and Volvo Dedicated 5 pin connector for GM/Opel applications & dedicated 6 pin connector for Ford/Land Rover and Jaguar applications.  
  • Part no. WF70-P

    Alba Safety Boot

    • Suede upper
    • Steel toe cap
    • Dual density polyurethane sole
    • Penetration resistant midsole
    • Oil resistant sole
    • Sizes 8-11 in stock, other sizes available to order
  • Part no. WF80-P

    Alba Safety Trainer

    • Suede upper
    • Steel toe cap
    • Dual density polyurethane sole
    • Penetration resistant midsole
    • Oil resistant sole
    • Sizes: 8-11 in stock, other sizes available to order
    • Special set of spline & torx socket bits for the removal of free-wheel alternator pulleys
    • Allows simple removal and installation of free-wheel alternator pulleys: on or off the vehicle
    • Permits alternator, allowing the central locking bolt of the pulley to be released
    • Can be used with hand tools or impact gun
    • Fits most alternators by using interchangeable adaptors; including VW, Audi, Seat, Mercedes, Renault, BMW, Ford, Renault, Fiat etc.
  • 0.5-4.0 BAR, 6 LITRE, 12V

    Pressure bleeding is the only method approved by brake manufacturers
    • Full fluid change can be completed by a single operator in approx. 15 minutes
    • Heavy duty pump for longer life & continuous use
    • Fully adjustable analogue pressure regulator, 0.5-4.0 bar
    • No compressed air used, therefore no possibility of contamination of the fluid
    • Storage facility for fluid collection container & accessories (ALB30564B Cap kit)
    • Suitable for use on Car & LCV brake systems & also on HGV clutches
    • 6L fluid change capacity
    • Operates off 12V supply (vehicle battery)
    • Stainless steel construction
     
  • Pressure bleeding is the only method approved by brake manufacturers
    • Full fluid change can be completed by a single operator in approx. 15 minutes
    • Heavy duty pump for longer life & continuous use
    • Fully adjustable analogue pressure regulator, 0.5-4.0 bar
    • No compressed air used, therefore no possibility of contamination of the fluid
    • Storage facility for fluid collection container & accessories (ALB30564B Cap kit)
    • Suitable for use on Car & LCV brake systems & also on HGV clutches
    • 6L fluid change capacity
    • 220V/240V 50HZ/60HZ mains operated
    • Stainless steel construction
  • Part no. ALBEAF8532

    Arc Flash Face Shield

    • A robust, heavy-duty, helmet mounted face shield with hearing protection compatibility. Polycarbonate browguard with ratchet headband. Full wrap-around visor. Conforms to: EN 166 B 3.9
  • Part no. ALB40100

    Asian Cap Adaptor Set

    • Set of 5 specialist Brake master cylinder caps for Asian vehicles
    Contents:
    • ALB560-11 (Applications: Nissan Qashquai 2009-, Primera, Radius, X-Trail, Renault Koleos
    • ALB40114 (Applications: Nisan Pixo 2009-, Suzuki Alto / SX4)
    • ALB40115 (Applications: Nissan Micra 2011-, Nissan Kubistar, Cabstar, Irvan)
    • ALB560-12 (Applications: Ford Escape / Kuga)
    • ALB30644B (Applications: Standard E20 thread Euro Cap with swivel elbow)
    • Current Clamp – 400AMPS
    • Compatible with graphing meters, scopes & DMM’s
    • Can be used for testing starting & charging systems
    • Auto power off & low battery indication
    • Test Ranges: AC Amps 0-40A, 400A (resolution 0.1A)and DC Amps 0-40A, 400A (resolution 0.1A)
    • Current clamp- 80Amps
    • Compatible with graphic meters. scopes and DMM's
    • Ideal for parasitic drain testing
    • Use for diagnostic analysis to generate current waveforms e.g. primary ignition coils, fuel injectors, fuel pumps, etc
    • 13mm jaw opening, clamps over most negative battery cables
    • Auto power off & low battery indication
    • AC Amps 0-20A, 80A (resolution 0.01A, for parasitic drain testing)
    • DC Amps 0-20A, 80A (resolution 0.01A, for parasitic drain testing)
    • Compatible with graphing meters, scopes & DMM’s
    • Can be used for testing starting & charging systems
    • Zero adjust control
    • Jaw opening 54mm
    Test Range AC Amps 0-600A, or 0 - 1000A (resolution 0.1A) DC Amps 0-600A, or 0 - 1000A (resolution 0.1A)
    •  CAT 111 1000v rated – safe to use on Hybrids
    • Unique plug-in IR thermometer attachment, with 8:1 distance ratio, range from -30 to +550
    • 48 Test Ranges, 18 Test functions
    • 1 Ms Peak Min/Max function for glitch capture
    •  Ms Pulse width for fuel injector on-time
    • 20 Amp Fused Test Range
    • Data Hold, Auto power Off +/- Trigger adjust
    • Also measures temp via K-type thermocouple
    • Waterproof to IP67 standards
    • Continuity: audible beep
    • Diode test
    • Backlit LCD display with 40 segment analogue bargraph
    • Hard storage case with protective holster for multimeter
  • Part no. ALB30933

    Automotive Relay Tester

    • Quickly tests 4 and 5 pin electro mechanical relays used on most cars • Checks for consistent functioning of relay contacts • Coil test voltage 9 volts • Automatically indicates test results with a series of red and green performance lights • 12v power supply required
  • Relay Tester for 4/5 pin relays (ALB30933)
    • Supplied with 2PCS adaptor set (ALB40212) to increase the range coverage of your existing relay tester
    • Supplied with 3PCS set of adaptors for shielded relays (ALB40213)
    ALB30933 Automotive Relay Tester
    • Quickly tests 4 & 5 pin electro-mechanical relays used on most cars
    • Checks for consistent functioning of relay contacts
    • Automatically indicates test results with a series of red & green performance lights
    • 12V power supply required
    ALB40212 Relay Adaptor Set 2PCS
    • Set of two adaptors to increase the range coverage of an existing relay tester
    • The adaptor plugs into the relay tester & the relay to be tested then plugs into the appropriate adaptor
    • For 4 & 5 pin relays as commonly used for fuel pumps & other powered components
    ALB40213 Relay Adaptor Set 2PCS
    • Set of three adaptors which allow an existing relay tester to test shielded relays
    • The shielded relay adaptor plugs into the same pin sockets as the normal relay & the shielded relay then plugs into the adaptor
    • Fits in any of the three 4 & 5 pin sockets on your relay tester
    • Detect the invisible inside parts of machinery (such as cars) to check whether it is working normally.
  • Part no. ALB40256

    Brake Adjustment Levers

    • For use on hydraulic brake systems
    • To adjust clearance between shoe & brake drum
    • For collection of brake fluid from the bleed nipples when bleeding brake systems
    • Chain to attach to Hub assembly, 300mm bleed hose with Universal bleed nipple connector
    • Allows for activating the bleed screws on the rear axles without removing the wheels
    • The open design of the wrench enables feeding through a silicon tube, e.g in a bleeding pump
    • Specially designed for VAG applications
    • Includes: 1x ratchet wrench 150mm with angled head, fine-tooth and reversible, 1 x bleed key SW11mm hex, 20mm short (VW Passat, Audi A4 etc) & 1 x bleed key SW11mmhex, 65mm long (VW Golf, Audi A3, Seat, Skoda etc).
    • An essential tool to retract caliper pistons prior to fitting new brake pads
    • Can be used with Tommy bar supplied or 1/2" square drive
    • Steel spreader plates open to maximum 65mm
    • Suitable for most calipers
    • Brake pad spreader for use when servicing brakes
    • Single handed operation
    • Suitable for cars & light commercials
    • Spring loaded, quick release action
    • 5-60mm spread
  • Part no. ALB40230

    Brake Caliper Service Kit

    Set of specialised tools for caliper servicing:
    • Caliper cleaning file
    • Wire brush
    • 7 & 8mm caliper hex wrenches
    • 4 & 6mm parallel pin punches
    • 14 & 19mm pentagon caliper sockets
    • 10mm pentagon caliper bit
    • Brake pad lining gauge set
    Supplied in metal tin with foam insert
  • Part no. ALB40254

    Brake Cylinder Hone Kit

    • Four cylinder-honing tools in one kit covering 18- 89mm cylinder bore
    • For honing and de-glazing car brake & clutch cylinders
    • Adjustable honing pressure & flexible drive shaft
    • Designed to measure the thickness of the brake discs, with the wheels still on the vehicle
    • Saves time – no need to remove the wheels or strip the brake first
    • Fits easily to most existing vernier calipers
  • • Ideal for use on all fuel supply lines to stop the flow of fuel after disconnection
    • Suitable for use on flexi and solid fuel lines
    • Fits: 3/8”, 5/16”, 1/2” & Steel Banjo
  • Part no. ALB1000, ALB1100, ALB1150, ALB1200, ALB1250, ALB1200BT

    Brake Fluid Tester

    The World's Number 1 Brake Fluid Tester THE SILENT KILLER Brake fluid is designed with a high boiling point to withstand the extreme temperatures generated during braking. It has one major drawback - it absorbs moisture (it's Hygroscopic). The more moisture in the brake fluid, the lower the boiling point. This increases the risk of "brake fade": under heavy driving conditions the brake fluid boils, turns to vapour, and the brake pedal goes right to the floor with no braking action. This is known as "vapour lock". That's why brake fluid is known as the "silent killer". It's a safety critical item, but how many drivers ever ask to get their brake fluid checked? A brake fluid test could potentially save them from accidents, and for the garage, it's a largely ignored service opportunity. The Alba patented brake fluid tester is approved, recommended and sold by the world's leading Brake System & Brake Fluid manufacturers, as well as leading global aftermarket brands. The Alba Brake Fluid Tester works on the boiling point method; the only industry approved method that guarantees reliable, repeatable and accurate test results.
    Model Part No.MAx TempPrinter Enabled
    ALB1000200°C / 392°FNo
    ALB1100320°C / 608°FNo
    ALB1150320°C / 608°FStandard
    ALB1200320°C / 608°FStandard Included
    ALB1250320°C / 608°FBluetooth
    ALB1200BT320°C / 608°FBluetooth Included
    • Ideal for quickly checking remaining life of brake pad friction material
    • The blade is inserted between brake disc & brake pad
    • Sizes: Red 2 & 3mm; Yellow 4, 5 & 6mm; Green 8, 10 & 12mm
    • For forming bends in brake & clutch pipe
    • For 4.75mm (3/16") & 6.00mm (1/4") diameter brake pipe
    • Ideal for use on vehicle or in restricted space
    • For forming bends in brake & clutch pipe
    • For 4.75mm (3/16") diameter brake pipe
    • Ideal for use on vehicle or in restricted space
  • Part no. ALB30746

    Brake Pipe Deburring Tool

    • For effectively de-burring brake pipes before fitting
    • Suitable for both inside & outside de-burring range
    • Pipe diameter range: 3/16” – 1 ½” OD
  • Part no. ALB40068, ALB40069, ALB40070

    Brake Pipe Ratchet with Flex Head 8mm

    • Ideal for use on brake pipe fittings
    • Flexi-head for tight areas
    • Unique lock on wrench head ensures wrench won't slip off when in use
    • Manufactured from Chrome Vanadium steel
    ALB40068- Brake Pipe Ratchet with Flex Head 8mm ALB40069- Brake Pipe Ratchet with Flex Head 10mm ALB40070- Brake Pipe Ratchet with Flex Head 11mm
    • Designed for scraping rust and dirt from brake pipes - for inspection purposes
    • Features a diamond encrusted surface for greater friction against the pipe
    • Set of 6 rewind adaptors specifically for BMW/Mini models
    • For use with any 3/8" Sq Dr caliper rewind tool (air or manual)
    • Can be used with ALB30990, ALB30845, ALB30728, and ALB30783
    • Designed to aid installation of brake shoe springs
  • Part no. ALB40228

    Brake Shoe Spring Pliers

    • Designed to aid the installation of brake shoe/brake drum springs
    • Suitable for most car and LCV applications
    • Length: 345mm
  • Part no. ALB40224

    Bush Sleeve Kit

    • Universal set of sleeves for removing and installing bushes, bearings etc
    • For use in conjunction with bearing press support block ( eg ALB40097 or equivalent) & workshop press
    • Standard universal applications: car, HGV, LCV
    • 20 bush sleeves - ID range: 34.5 - 72.5mm, OD range: 43.5 - 82.5mm
    • Adaptor plate for use with press block
    • Made of brass wire
    • Required on aluminium brake callipers to remove brake dust
    • Also suitable for cleaning work on all sensitive, metallic surfaces
    • Edge size 90 x 22mm, hook hole
    • Made of steel wire
    • Edge size 90 x 22mm, hook hole
    • Made of brass / steel wire
    • Brass cleaning brush required on aluminium brake callipers to remove brake dust
    • Also suitable for cleaning work on all sensitive, metallic surfaces
    • Edge size 90 x 22mm, hook hole
    • For removal of brake dust that has become firmly burnt onto brake callipers
    • Narrow file that is milled on 2 sides
    • Brake caliper guide thread repair kit
    • Complete with a titanium coated core drill, tap & 10 threaded inserts
    • Suitable for Volkswagen Audi Group (90mm centre to centre); Opel/ Vauxhall (94mm centre to centre); Ford (105mm centre to centre)
    • Used to hold the brake caliper away from the hub when replacing brake pads
  • Part no. ALB30564A

    Cap Kit

    • Suitable for use with most pressure brake bleeders
    • Includes section of 11 different types/sizes of brake master cylinder caps
    • European cap adaptor
    • Multi-vehicle cap adaptor
    • 3x Chrysler / Jeep / GM cap adaptors
    • 5 x specialist cap adaptors covering BMW/Audi, Honda, Hyundai, Mitsubishi, Mazda, Nissan etc
    • 1 x specialist cap adaptor for Toyota / Lexus
    • Syringe for fluid level reset
    • Selection of adaptors to fit popular European & Japanese vehicles, to enable testing of cooling system pressure caps
    • Can be used in conjunction with Alba cooling system Pressure Test kits: ALB30923 + 30924 + 40046
  • The EHV Multimeter and Insulation Tester is a true RMS multi-meter designed for testing and checking components on electric and hybrid vehicles through the continuity test and diode test. The multimeter function is combined with an inbuilt Insulation Test facility making it ideal for troubleshooting and preventative maintenance. The Insulation test function operates at the following test voltages: 50v, 100v, 250v, 500v and 1000v. The EHV Multimeter and Insulation Tester is supplied with all test leads and clips, temperature probe, manual and batteries. Complies with EN61010 CATEGORY III (1000v) and CATEGORY IV (600v)
  • Part no. ALBNVP4025

    Cat1V High Voltage Tester

    The No Voltage Present Detector is essential equipment for Hybrid and Electric vehicle technicians to prove that there is no voltage present prior to working. A simple LED scale indicates the voltage range present at the time of testing.  An independent ELV indicator shows if >50VAC / 120VDC is present even if there is no battery power to the unit or the main circuit has failed. The NVP4025 No Voltage Present Detector has a safe test range from 12V to 1,000V AC/DC.  Voltage measurement is in increments as follows: 12, 24, 50, 120, 230, 400, 690 & 1,000 Volts. Conforms to the following safety standards:
    • BS EN61243-3
    • TUV-GS38
    • EN61010-1 CAT III – 1,000V
    • EN61010-1 CAT IV – 600V
    • Adjustable heavy duty circlip pliers with interchangable internal and external ends, length 260mm
    • Sizes range from 9mm-45mm (interchangable ends) 2x 45 degree angle - dia 2.25mm 2 x 15 degree angle - dia 2.25mm 2x 45 degree angle - dia 2.
    • Set includes 90 degree & 45 degree internal and external pliers; Tip 1.2mm
    • Kit contains: 15 of each approx internal circlips size: 10, 12, 14, 16, 18 and 20mm
    • 5 of each approx external circlips size: 32mm
    • 10 of each approx external circlips size: 20, 22 and 25mm
    • 20 of each approx external circlips size: 6, 8, 10, 12, 14, 16 and 18mm
  • Part no. ALB30859

    Coil Spring Compressor

    • 1000kg (10200Nm) maximum jaw loading, with a 2.75 safety factor
    • Supplied with 3 pairs of drop-forged jaws;80-110mm diameter, 88-160mm diameter & 126-212mm diameter
    • Safety jaws shaped to prevent coil spring from bowing & slipping
    • Suitable for use with 21mm combination spanner
    • NOT SUITABLE FOR USE WITH AIR IMPACT WRENCHES
    • Applications: Alfa, Audi, BMW, Citroen, Daihatsu, Fiat, Ford, GM, Honda, Jaguar, Lada, Lancia, Mazda, Mitsubishi, Nissan, Peugeot, Porsche, Renault, Rover, Saab, Seat, Skoda, Subaru, Suzuki, Toyota, Volvo, VW
  • Finds squeaks & rattles electronically - whilst vehicle is under load
    • Improves workshop efficiency, revenues, customer satisfaction & saves time
    • Listen to 6 under chassis locations at one time - all in one road test
    • Hear noises that cannot be duplicated in the workshop
    • Essential for saving needless warranty expense
    • Supplied with headphones, control unit, noise wand & 6 pick-ups
  • Part no. ALBCUG6915

    Cotton Liner Gloves

    • Cotton Under Gloves should be worn underneath the Electrical Insulating Gloves to improve comfort and hygiene. The use of the cotton under gloves also improves the fit of the safety gloves and improves dexterity.
    • Pressure test kit for testing cooling system pressures
    • Aluminium system connector caps 7x, with quick connectors
    • Aluminium pressure pump including connecting hose & pressure relief valve
    • Applications include: DAF, Deutz, ERF, Iveco, MAN, Mercedes, Renault, Scania, Volvo
    • Unique inflatable bladder sealing system provides universal coverage for cars & light commercials- no individual adaptors required
    • Suitable for system neck diameters up to 60mm
    • Helps to locate leaks from: Head Gaskets, Radiator & Heater Cores, Water Pumps & Hoses, Core Plugs & Engine Blocks
    • Check the cap pressure with 6 unique double ended adaptors supplied to test the most common automotive pressure caps
    ALB70800-96 - Replacement Bladder for ALB70889 kit (single)
  • Part no. ALB40276B

    Digital Battery Tester

    ALBA40276B Battery Tester adopts currently the worlds most advanced conductance testing technology to easily, quickly and accurately measure the actual cold cranking amps capability of the vehicles starting battery, health state of the battery itself and common fault of the vehicle starting system and charging system, which can help maintenance personnel find the problem quickly and accurately
    • Measurement range: 0 - 150mm (metric & imperial)
    • Resolution: 0.01mm
    • Accuracy: 0.01mm
    • LCD Display
    • Packaging: sturdy plastic case
    • ALB30598 Digital Vernier Caliper 0-150mm (metric & imperial)
    • ALB40029 Digital Brake Disc Caliper 0-60mm (metric & imperial)
    • Packaging: sturdy plastic case
    • Measurement range: 0 – 60mm (metric & imperial)
    • Resolution: 0.01mm
    • Accuracy:  0.04mm
    • LCD Display
    • Includes serial port connection for computer interface
    • Packaging: sturdy plastic case
    • ALB30598 Digital Vernier Caliper 0–150mm,  with ALB40157 Brake Disc Measuring Tool
    • Measures thickness of brake disc without having to remove the wheel
    • Packaging: sturdy plastic case
    • Measurement Range: 0-300mm (metric and imperial)
    • Resolution: 0.01mm
    • Accuracy: 0.01mm
    • Sturdy plastic case
  • Contains all the digital tools required for essential brake service measurement; an essential kit for all fast fit outlets, service centres & road safety checks.
    • ALB30596 Brake Discs & Pads
    • ALB30597 Brake Drums & Shoes
    • ALB30586 Brake Pad Thickness & Tyre Tread Depth
    • ALB30602 Brake Disc Runout
    • ALB30598 Digital Vernier Caliper
    • Supplied in a sturdy plastic case with foam inlay
  • Part no. ALB30612

    Digital Micrometer 0-25mm

    • Two button digital micrometer with Auto power-off
    • Zero display in any position for relative & tolerance readings
    • Range: 0-25mm/0-1"
    • Resolution: 0.001mm/0.00005
    • Packaging: sturdy plastic case
  • 0.5-4.0 BAR, 6 LITRE, 12V

    Pressure bleeding is the only method approved by brake manufacturers
    • Full fluid change can be completed by a single operator in approx. 15 minutes
    • Heavy duty pump for longer life & continuous use
    • Fully adjustable digital pressure regulator, 0.5-4.0 bar
    • No compressed air used, therefore no possibility of contamination of the fluid
    • Storage facility for fluid collection container & accessories (ALB30564B Cap kit)
    • Suitable for use on Car & LCV brake systems & also on HGV clutches
    • 6L fluid change capacity
    • 12V charge input & 12V power outlet for use with other 12V powered tools
    • Operates off 12V internal power supply
    • Stainless steel construction
     
    • Tests antifreeze, battery acid and screenwash
    • Measurement shows within 1 second
    • Automatic Temperature Compensation
    • Supplied in handy pouch, pipette and calibration fluid
    • Automatic switch-off
    • Simple flip top mechanism
    • Measurement range - 0-25mm (metric and imperial)
    • Tolerance +/- 0.05mm
    • Sturdy plastic case
    • Measurement Range: 0 - 25mm (metric & imperial)
    • Tolerance: +/- 0.05mm
    • Packaging: sturdy plastic case
  • Part no. ALB30598

    Digital Vernier Caliper

    • Measurement range: 0-150mm (metric & imperial)
    • Resolution: 0.01mm
    • Accuracy: 0.03mm
    • Packaging: sturdy plastic case
    • DTI Gauge (0-10mm: 0.01 accuracy)
    • Magnetic Base for DTI Gauge
    • Micrometer (0-25mm)
    • Includes analogue dial indicator, special grip clamp & flexible shaft
    • Measurement  Range: 0 - 12.5mm (metric & imperial)
    • Resolution:  0.01mm
    • Accuracy: 0.01mm
    • Packaging: sturdy plastic case
    • Includes digital dial indicator, special grip clamp, and flexible shaft
    • Measurement  Range: 0 - 12.5mm (metric & imperial)
    • Resolution:  0.01mm
    • Accuracy: 0.01mm
    • Packaging: sturdy plastic case
  • Part no. ALBSDT4672

    Disconnect Shut Down Timer

    Disconnect and shut down digital timer used to accurately measure the required shut down period between switching off the ignition and disconnecting or reconnecting the vehicle’s battery etc. Particularly important where airbag, BSI, hybrid and electric vehicle ECU’s need time to shut down before proceeding with further work. Suitable for technicians working on hybrid and battery electric vehicles on a regular basis.
    • Dimensions: 70(H) x 70(W) x 25(D)mm
    • Material: Plastic
    • Weight: 46g
    • Colour: White
    • Rear magnet and fold out stand
    • Large digital display is easy to read at a glance
    • Requires 1x AAA battery (supplied)
  • Part no. ALB40315

    Disposable Visors

    • Non-medical
    • Disposable Visor Specifications:
    •  One size fits all
    • Head size 49cm to 64cm
    • Screen dimensions 16.7cm x 21cm
    • Cardboard headpiece – fully recyclable – 500um white folding box-board
    • Anti-mist film – 71um poly
  • Electronic BATTERY MANAGER for total maintenance of WET, GEL, AGM, MF, PbCa, EFB and Li batteries at 12/24V and for support activities when intervening on vehicles in workshops, repair shops and car dealer premises. The innovative Power Stream technology guarantees better performance, up to 50% more than traditional battery chargers. 1.The Pulse Tronic technology guarantees optimal battery charging over 8 phases. 2. battery tests such as voltage at terminals, starting capacity (CCA) and operational check of the vehicle alternator; 3. recovery of sulphated or very discharged batteries, and recovery of optimal operation with periodic regeneration; 4. stable power supply source for battery changes (to protect the on-board electronics), for diagnostic activities (operation checks carried out on the vehicles), for keeping the batteries of display vehicles in showrooms operational; 5. vehicles start. Based on the SMPS (Switch Mode Power Supply) Technology.In case of black-outs or repetitive uses Doctor Charge 130 can set itself at the last settings carried out. Many protections available. Fit with PFC device.
  • ALB40295A DOCTOR CHARGE 50 230V 6V/12V/24V (Charger/starter) Electronic BATTERY MANAGER for total maintenance of WET, GEL, AGM, MF, SPIRAL, START-STOP batteries at 6/12/24V and for support activities when intervening on vehicles in workshops, repair shops and car dealer premises. The innovative Power Stream technology guarantees better performance, up to 50% more than traditional battery chargers. The Pulse Tronic technology guarantees optimal battery charging over 8 phases. Doctor Charge 50 carries out 5 functions: 1. automatic charge and maintenance of batteries with PULSE TRONIC technology, even in difficult environmental conditions (low temperatures); 2. battery tests such as voltage at terminals, starting capacity (CCA) and operational check of the vehicle alternator; 3. recovery of sulphated or very discharged batteries, and recovery of optimal operation with periodic regeneration; 4. stable power supply source for battery changes (to protect the on-board electronics), for diagnostic activities (operation checks carried out on the vehicles), for keeping the batteries of display vehicles in showrooms operational; 5. vehicles start aid. Based on the SMPS (Switch Mode Power Supply) Technology. In case of black-outs or repetitive uses Doctor Charge 50 can set itself at the last settings carried out, furthermore the cables can be calibrated according to their type (different lengths and/or sections). Many protections available. Fit with PFC device.
    • Double-ended caliper piston rewind tool - RH & LH applications in one tool
    • Essential tool for fast & easy brake pad replacement & caliper servicing
    • Suitable for use with any standard 3/8" sq dr rewind adaptors
    • Ideal for use with ALB30844 piston rewind adaptors set
    • Heavy duty double-ended Caliper Piston Rewind tool for RH & LH applications - 3/8" sq dr
    • Can be used with either standard 3/8" sq dr rewind apators or with universal adjustable adaptors
  • The Electric Vehicle Roof Top Warning Sign.
    • High visibility warning to all employees of Electric or Hybrid vehicles being present in the workshop.
    • Constructed from durable rigid plastic.
    • Foam protected feet to prevent damage to the vehicle bodywork.
    • Size: 310mm x 235mm x 3 sides.
    • Aid installation & removal of large & small T-slot anti-rattle washer found in drum brake assemblies
    • Large viewing cut-away to allow correct alignment of washer
    • Simple push & twist action
  • Multifunction 12V/24V lithium starter, equipped with: - two USB outputs (1A-2,1A) to charge (power bank) electronic devices (tablets, smartphones, etc.), - high intensity LED lights with three function modes for fixed or emergency lighting. It uses high-efficiency LiPO lithium polymer cells that provide rapid and complete charging, constantly monitored by a series of LEDs. Compact and strong it is designed for the professional use. Protection against polarity reversal. Complete with starting cables, cigarette lighter plug and wall charge.
    • An easy to use device which will confirm each EBS/ABS sensor is operational and effective.
    • By connecting to the sensor socket on each wheel, individual sensor faults can easily be identified.
    • Tests the exciter ring and the distance between the ring and sensor.
    • Quick, accurate and simple to use
    • Performs a complete test cycle in 15 seconds
    • Reduces down time for sensor related problems by up to 80%
    • The unit also tests the exciter ring and the distance between the ring and sensor
    Product kit contents: • Control unit • 1.6m high-spec sensor connector cable • Adaptor cable with crocodile clips for non-standard EBS plugs • 9v battery (supplied) • Supplied in watertight, sturdy carry case, for use in outdoor environments  
  • Electric & Hybrid Full Starter kit. Everything you need to start servicing Electric & Hybrid Vehicles Safely Kit Contents
    • ALBRPK3610-RW - Barrier Chain with Rubber base Posts kit (Red & White)
    • ALBIRP2920 - Insulated Rescue Pole
    • ALBESP7299 - Safety Poster - ELECTRIC SHOCK POSTER
    • ALBHVE7750 - Safety Poster HIGH VOLTAGE ELECTRIC SHOCK
    • ALBRIM2311 - Electrical Insulating Rubber Mat to IEC61111 - 1m x 1m Mat
    • ALBKLS4237 - EHV Lockout Station for Vehicle Keys & Padlocks
    •  ALBLOP7943 - Lockout Safety Padlock - Long Shackle (x2)
    • ALBKLT7050 - Lockout CAR KEY tags for EHV(re-usable)x10 with marker pen
    • ALBLOT4148 - Lockout Padlock tags for EHV(re-usable)x5 with marker pen
    • ALBLNH7942 - Lockout Safety Nylon Hasp - use with tasg &/or SWC
    • ALBSWL4721 - Steering wheel Lockout with Warning Sign
    • ALBSGK6955L - Electrical Safety Glove Kit - Large
    • ALBCUG6915 - Cotton Under gloves x12 pairs
    • ALBEAF8532 - Electric Arc Protector Face Shield Visor - Lightweight
    • ALBFSB8590 - Face Shield Protective Storage Bag
    • ALBA18-LIGHTENING - EHV Electrical safety Boot (sizes 6-9 confirm size)
    • ALBRTP7234 - EHV Roof Top Warning Sign
    • ALBTCS6639 - High Voltage No Admittance Sign Rigid 400 x 300mm
    • ALBIPS7221-HV - Sign ISO Pictogram - High Voltage
    • ALBHVS7561 - High Voltage Re-usable Adhesive Sticker (x10)
    • ALBHVT8049 - High Voltage Vehicle Tags (x10)
    • ALBCES7550 - Insulated Cable Shrouds 18&24mm (x10)
    • ALBMIT4094 - EHV Multimeter with Insulation Test CAT111 to 1000VDC
    • ALBNVP4025 - No Voltage Present Detector - CAT111 Certified
    • ALBSDT4672 - Disconnect Shut Down timer for EV's
    • ALBEVT6150 - Insualted Tool Kit 3/8" Drv 25PCS
    • ALBEVT5515 - Insulated Hex Key Set Extra Long 6PCS VDE Certified
    • ALBEVT7751 - Insulated Star Key Set Extra long 9PCS VDE Certified
    • ALBEVT7885 - Insulated Inspection Mirror 50mm - EN/IEC 60900:2012 1000V
    • ALBEVT7211 - Insulated Magnetic Pick Up Tool
    • ALBEVT7551 - Insulated Trim/Cable mgmt set 4PCS
    • ALBITS1301 - Insulated Transparent Shroud 1000V 1M x 1.3M
    • ALBIPC6025 - Insulated Clamp To secre Shroud Material (x2)
     
  • Part no. ALBA18-Lightening

    Electric EV Safety Work Boots

    High voltage is now a critical factor in personal safety due to the latest generation of electric and hybrid vehicles. The safety boot is fully compliant and fully electrically insulated. They meet all UK and EU requirements for safety footwear, along with international standards for high voltage (1000v). Size: UK 6-14 (Whole Sizes)
  • Electric Shock First Aid and CPR Advice Polymer Poster.
    • The High Voltage Electric Shock Safety Poster is printed on a durable polymer panel.
    • Displays an easy to follow casualty assessment guide and CPR instructions.
    • Size:  750 x 500mm.
    • High voltage protection up to 20,000V
    • Approved to European standards
    • Fuel and oil resistant rubber sole
  • Part no. ALB40292A

    EV Battery Lift (1T)

    ALB40292A; suitable for lifting electric vehicle batteries weighing max1000kg. Suitable for use in installation & dismantling of new electric vehicle batteries. 4 castors with brakes Adjustable lowering speed Tilted platform design ensures secure fit to battery pack
    • Split table and tapped top plate
    • Double safety guarantee: hydraulic and mechanical safety lock
    • Providing the lowest and highest height limit to ensure safe operation
    • With a platform leaned all round and moving horizontally, it is a good helper for the installation and maintenance of vehicle battery or engine
    • It's easy to move the platform with hydraulic lifting trailer
    • Capable of lifting vehicle battery / engine within 1200kg
    • Equipped with adjusting handle to make operation more convenient
    • Thanks to the gimbaled level, the users could monitor the real-time horizontal position of the platform
    • Electric hydraulic drive , 24V safety voltage control, good security.
    • The base is mounted with four universal wheels for easy movement of the lift.
    • The handle can be adjusted to the level facilitate the lifting of the power battery
    • With minimum and height limits
    • There are many M10 threaded holes on the surface of the platform to facilitate the installation of positioning kits, suitable for different types of vehicles.
    • Sliding blocks adopt oil free super-wearable materials.
    • The sliding platform can be moved 40mm in-plane.
    • With hydraulic lock and mechanical dual-gear safety-claw lock double safety device, adversely, safe and reliable.
    • Heavy duty dielectric face shield
    • Full wrap-around visor
    • Polycarbonate brow guard
    • Ratchet adjustable headband
    • Conforms to EN166B3.9
    • Prevents damage to the Face Shield visor
    • To treat burns caused by heat and electric arc
    • Includes antidote gel for Hydrofluoric Acid exposure
    • Supplied with integral wall mount bracket
  • • High quality chrome vanadium • Sizes - 10x11, 13x14, 15x17mm • Supplied in protective carry pouch
  • Part no. ALB40294A

    Flashstart 700

    • 12V battery less starter (ultra-condensers technology).
    • It starts a large fleet of vehicles even at low temperatures. No maintenance require: Flash Start exploits the residual battery power to start the vehicle.
    • It can be charged via USB or a 12V cigarette lighter socket.
    • GLOW function for starting diesel engines at low temperatures.
    • Protection against short-circuits and polarity reversal.
    • Supplied with a charger cable with cigarette lighter plug (12V) and a hexagonal wrench (for the battery terminals on-board the vehicle).
    • Allows for removal of plastic and/or metal self tightening hose clamps with diameters of 18mm—54mm
    • Double gear lock lever with wide deep gears for secure locking
    • Cable adjuster and multiple gear-lock provide accurate and secure locking for any clamp position within range
    • A wide-ranging kit designed to stop the flow of fuel from fuel lines after disconnection
    • Also suitable for use with brake lines, transmission lines and other pipe applications
    • Consists of 6x pairs of fuel supply clamps, and 6 x hose end stoppers
    • Suitable for 3/16", 1/4", 5/16" pipe and banjo fittings
  • Part no. ALB30914A

    Fuel Retriever 40 Litre

    Stainless steel construction with venturi type suction system (requires workshop air supply) - 40L tank capacity
    • Suitable for petrol or diesel fuel extraction
    • Unique fume extraction system for added safety - draws out residual fuel vapour & recycles it through the fuel extraction system
    • Also suitable for fuel extraction via fuel inlet pipes, on both injection & carburettor engines
    • CE certified for fuel handling
    • Supplied with: suction hose with valve for extraction via fuel filler neck; 3x flexible suction probes; 2x earthing connections with croc clips; set of 8x fittings & hose for extraction via fuel supply pipes & connection
    The ALB30914A is in compliance with ATEX which covers both DSEAR & HSE's regulation.
  • Part no. ALB30634A

    Fuel Retriever 90 Litre

    Stainless steel construction with venturi type suction system (requires workshop air supply) - 90L tank capacity
    • Suitable for petrol or diesel fuel extraction
    • Unique fume extraction system for added safety - draws out residual fuel vapour & recycles it through the fuel extraction system
    • Also suitable for fuel extraction via fuel inlet pipes, on both injection & carburettor engines
    • CE certified for fuel handling
    • Supplied with: suction hose with valve for extraction via fuel filler neck; 5x flexible suction probes; 2x earthing connections with croc clips; set of 8x fittings & hose for extraction via fuel supply pipes & connections
    The ALB30634 is in compliance with ATEX which covers both DSEAR & HSE's regulation.
    • Supplied with both ALB30634A and ALB30914A, but available separately for other applications
    • Essential tool for removing the retaining ring on fuel tank senders
    • Select two or three jaw option
    • Size ranges: 75mm-160m, 80mm-122mm, 110mm-170mm
    • Master kit for separating automotive air conditioning hoses and fuel lines
    • Suitable for a wide variety of vehicles including Ford and Vauxhall/Opel
    Contents: Spring lock couplings; 3/8", 1/2", 5/8", 3/4", colour coded disconnecting set; 5/16", 3/8", 1/2", 5/8", 3/4" and 7/8, Fuel line disconnect tool Ford oil cooling line disconnect tool, Ford fuel line coupling tool, Ford/Vauxhall/Opel quick disconnect tool, 7pc disconnecting set, spare rubber bands
    • For the safe & quick removal & installing of GEN2 type hub bearings
    • Reduces risk of damage to ABS sensor rings
    • Specially designed centre alignment adaptor to ensure perfect alignment when re-fitting bearings
    • Hydraulic upgrade option available
    • Applications:
      • VAG (72mm); Audi A1, Audi A2, Seat Cordoba, Seat Ibiza, Skoda Fabia, Skoda Roomster, VW Polo, VW Touran
      • Ford / Volvo (78mm); Ford Focus II, Ford C-Max, Mazda 3, Volvo C30, Volvo C70, S40, V50
      • Ford / LR / Volvo (82mm); Mondeo 2007 on, Galaxy, S-Max 2006 on, Land Rover Freelander 2 2006 on
  • Part no. ALBGLD-40A

    GLD-40 Smoke Wizard

    The advanced smoke wizard GLD40 combines pressure and vacuum leak measurement for Evaporative Emission (EVAP) and general purpose leak detection in a compact design. Uses automotive system safe, OEM-approved UltraTraceUV dye smoke solution, the smoke that won't stink! To find the leak when the smoke is gone or when the leak(s) may be hidden and disassembly is required, use the included combination light to see the dye and pinpoint the exact leak location
    • Re-threading kit for 8,10, 12mm glow plugs
    • Replaceable consumable items available
    • Suitable for alloy cylinder heads
    • Tap sizes: M8 x 1.0, M10 x 1.0 & 1.25, M12 x 1.0 & 1.25 M14 x 1.25
    • Coil sizes: M8 x 1.0, M10 x 1.0 & 1.25, M12 x 1.25
    Spare Part ALB30997-1  Set of 20 thread inserts (4 sizes x 5 of each)
    • For the powerful loosening of brake pipe fittings & bleeding nipples
    • Wrench can be used on fasteners up to 14mm without any problem
    • All fastener profiles are gripped in three places
    • Unique patented design
    • Suitable for brake pipe flaring, directly on the vehicle
    • Ideal for brake pipes in steel, aluminium, copper and cupro-nickle
    • Punches and dies for 4.75mm (3/16") - 5mm -6mm (1/4") diameter included in kit
    • Suitable for both single and double lap flares for SAE and DIN flare forms
    • Also suitable for plastic sheathed brake lines
    • Uses hydraulic power to generate force for ease of use
    • Set includes a mini pipe cutter (3-16mm)
    • Same as ALB30893 but with 3/16" SAE only
    • Patented design for producing high quality flares on the vehicle
    • Creates 3/16" & 4.75mm SAE single & double flares
    • Lightweight & extremely easy to use
    • For mild steel, cupro nickle & copper tube
    • Use with two ratcheting spanners 10 & 16mm (not included)
    • Small & compact for easy use in confined areas
    • Allows quick & easy removal & installation of the handbrake cable by compressing the retaining spring
  • Part no. ALB30860

    Heavy Duty Prybar Set

    • Set of four - heavy duty angled pry bar shafts, square profile bar with blackened finish
    • Fitted with textured grip handle & hammer cap
    • Set consists of - 6x200mm, 8x300mm, 11x460mm, 11x610mm
    • Set of 2 probes for insulation piercing connection to cables
    • Robust plastic moulding suitable for high temperatures.
    • Protected tip to avoid shorting on earth Supplied with 4mm shrouded female connector for connection to standard multimeter cables.
    • Also available individually as ALB30784R Heavy Duty Wire Piercing clip (red) ALB30784B Heavy Duty Wire Piercing clip (black)
  • High Voltage Warning Vehicle Stickers - re-useable.  Designed to indicate high voltage areas on an EV, such as charging port, battery, capacitor bank etc.  These reusable vinyl labels have a low-tack adhesive which does not leave residue on the vehicle and enables them to be used many times.
    • Indicates high voltage parts of the vehicle.
    • Label dimensions: 150 x 75mm.
    • Supplied in a pack of 12.
  • “High voltage” ISO Pictogram denotes a Hazard or Prohibition message without text.
    • Suitable for use throughout Europe.
    • Printed on a durable polymer panel measuring 25 x 20cm
    • Fitted with a durable sucker to allow placement on any smooth surface.
    Save 10% when purchasing the ISO Pictogram Warning Sign Pack of 3 signs – (1 of each design)
  • Part no. ALBHVT8049

    High Voltage Vehicle Tags

    High Voltage Vehicle Identification Tags.  Manufactured from lightweight PVC and designed to be deployed on the vehicle rear view mirror or indicator stalk.  Provides a visible warning of potential high voltage danger.
    • Designed to serve as a warning that vehicle is EV or hybrid.
    • Ideal for workshops, or car hire companies to hang inside customer cars.
    • Provides additional safety warning to identify hybrid/EV vehicles.
    • Size: 177 x 66.5mm.
    • Can hang on internal rear view mirror, steering wheel or indicator stalk.
    • Supplied in pack of 10.
     
  • Electric & Hybrid Vehicle combined Danger High Voltage / No Access sign.
    • Inform customers of the dangers, and that access is for authorised personnel only.
    • Printed on a 3mm polymer panel.
    • Size: 300 x 400mm
  • Part no. ALB40316

    Hub Cleaner Plastic

    • Plastic bell 1/2" sq dr - for use with pneumatic impact wrenches
    • Corrosion between the wheel rim and the wheel hub is removed effectively
    • Torque valves no longer distorted by a build up of corrosion
    • Complete with 1 abrasive cleaning disc - 150mm diameter
    • Fits all Hydrolastic/Hydragas Suspension Systems
    • Portable, robust & can be easily used for roadside repairs
    • Low Loss Connector allows secure connection to vehicle with no loss of fluid/pressure during connection or disconnection
    • Fast & efficient pressuring of vehicle systems- Operates up to 1000psi
    • Any air in the vehicle system can be easily removed by pressuring to the approximate trim height, then momentarily releasing the pressure into the pump reservoir
    • Trim height chart included
    Spares ALB642 Replacement Low Loss Connector ALB643 Replacement Low Loss Connector with Hose ALB635 Spares Kit (includes: inlet/outlet valves and external hose)
    • Master set of gear pullers & bearing separators
    • Forged steel bearing separator
    • 10 tonne hydraulic ram
    Kit Contents
    • 10 tonne hydraulic ram
    • 3 x 100mm leg
    • 3 x 150mm leg
    • 3 x 200mm leg
    • 1 x twin head, 1 x triple head
    • Extension nose pieces; 1 x 50mm, 1 x 100mm
    • Separator pulling rods; 4 x 200mm
    • Twin pulling beam & separator 75-105mm
    • Torque-limited impact wrench set, designed for removal of diesel engine glow plugs
    • Four position torque limiter - 10, 20, 30 & 40Nm - for controlled torque vibration
    • Uses controlled impact torque to create vibration in order to loosen seized glow plugs
    • Removes the risk of breaking glow plugs, or damaging the cylinder head
    • Can also be used for removal of other seized threaded fasteners or plugs up to 12mm
    • Set Includes: Torque-limited Impact Wrench 1/4 sq dr; impact glow plug sockets - 8, 9, 10, 11, 12mm; impact extensions - 50, 100mm; impact universal joint
  • Part no. ALBCES7550

    Insulated Cable End Shrouds

    Insulated Cable End Shrouds for Electric and Hybrid vehicles.  Used to insulate and protect cable terminal ends during component replacement.  Specially moulded to incorporate a self-grip collar. Supplied in a pack of 10 sleeves, 5 of each two sizes. 5 of 18mm OD x 14mm ID x 100mm long 5 of 24mm OD x 20mm ID x 100mm long  
  • Insulated Spring Loaded Plastic Clamp for shroud. Spring-loaded plastic clamp for securing engine bay protective shroud.
      • Dimensions: 165 x 82 x 18mm
      • Jaw opening: 25 mm
      • Insulation rating to 1,000 Volts
  • Insulating Rubber Mat 1m Electrical Insulating Rubber Matting is essential for ensuring the safety of technicians whilst working on Electric and Hybrid Vehicles. Manufactured to the international standard IEC 61111 Class 0, offers protection up to 1,000 volts. produced with a ribbed profile giving it an increased surface area, which helps to disperse electrical discharge and offers anti-slip properties. Size: 1m x 1m
  • Part no. ALBSGK6955

    Insulated Gloves Set

    The Electrical Safety Glove Kit with Storage Case contains:
    • Cotton Under Gloves (12 pairs)
    • Electrical Gloves –  Insulate to 1,000V Class 0 (1 Pair)
    • Leather Over-Gloves (1 Pair)
    • 1 x Safety Glove Storage Box
    Available in Medium, Large or Extra Large sizes
    • Essential PPE when working on high voltage systems
    • Electrical Gloves – Insulate to 1,000V (Class 0)
    • Cotton under-gloves improve dexterity and user comfort
    • Leather over-gloves protect the rubber insulating gloves from mechanical damage
    • Robust polypropylene storage case to protect gloves
  • Part no. ALBEVT5515

    Insulated Hex Key Set 6pc

    6 Piece Insulated Hex key set Extra Long (VDE Certified) tested to 1000volt. Sizes: 2.5mm/3mm/4mm/5mm/6mm/8mm.
  • Part no. ALBEVT7885

    Insulated Inspection Mirror

    1000v Insulated Inspection Mirror, for use when working on electric vehicles.

    • Ideal for the inspection of High Voltage Cables & Connectors in confined areas. For e.g. such as battery packs, controller & difficult to get to under vehicle areas.
    • Insulated Rubber moulded casing for easier handling.
    • 50mm diameter mirror disc.
    • 170mm handle length.
    • Manufactured from non-conductive materials.
    • Manufactured & Tested to EN/IEC 60900:2012 Standard, for up to 1000V live working.
    • Made in the UK.
  • Insulated magnetic pick up tool with long reach, ideal for retrieval of dropped fasteners and small components.
    • Approved for live working up to 1,000Volts.
    • An essential tool for electric vehicle maintenance technicians.
    • Lifting capacity up to 250g.
    • 5mm diameter magnetic head.
    • 420mm long reach with insulated shaft and handle.
     
  • An electrically insulated rescue pole with hook, 1.45 metres long and rated to 45kV supplied with wall mounting brackets. Designed to safely remove victims of electric shock from danger. Conforms to NF EN 50508.
  • Insulated Tool Kit, ½” Drive, VDE Certified for live working up to 1,000V AC / 1,500V DC.  Supplied with 6pt sockets ranging from 10mm - 27mm, hex keys, ratchet wrench, extension bars, adjustable spanner, pliers and screwdrivers.  A comprehensive set of tools to cover most service and repair needs when working on Electric and Hybrid vehicles.
    • 13 x 1/2"Dv. Insulated Socket - 10, 11, 12, 13, 14, 16, 17, 18, 19, 21, 22, 24, 27.
    • 4 x 1/2"Dv. Insulated Hex/Allen Extra Long Socket - 4, 5, 6 and 8mm – 120mm long.
    • 2 x 1/2"Dv. Insulated Extension Bar 125mm and 250mm.
    • 1/2"Dv. Insulated T-handle Wrench 200mm
    • 1/2"Dv. Insulated Reversible Ratchet 250mm
    • Insulated Combination Plier 180mm
    • Insulated Side Cutter 160mm
    • Insulated Snipe/Long Nose Plier 160mm
    • Insulated Adjustable Wrench 200mm
    • 2 x Insulated Screwdriver - Slotted - 4.0x100mm and 5.5x125mm
    • 2 x Insulated Screwdriver – Phillips - PH1x80mm and PH2x100mm
    • VDE/GS certified and IEC60900 approved for safe work up to 1,500 Volts DC.
     
  • Insulated tool set, for live working up to 1,000V AC / 1,500V DC. Supplied with sockets and Open End Spanners, ranging from 7mm - 22mm.  Also includes; pliers, screwdrivers and a cable knife.
    • 9 x 3/8"D sockets: 7, 8, 10, 12, 14, 15, 17, 19, 22mm. Length: 71mm.
    • 3/8"D 72 teeth ratchet; extension bar 100mm; T-handle.
    • combination pliers 175mm; side cutter 150mm.
    • 6 x Open End Spanners: 7, 8, 10, 12, 14, 17mm.
    • 1 x Cable Knife.
    • 4 x Screwdrivers: Phillips: Ph1 x 100mm, Ph2 x 100mm; Flat: 5.5 x 125mm, 4 x 100mm.
    • VDE/GS certified and IEC60900 approved for safe work up to 1,500 Volts DC.
  • Part no. ALBEVT7751

    Insulated Torx Key Set 9pc

    9 Piece Insulated STAR / Torx / Torx head Key set – VDE Certified Sizes: T10/T15/T20/T25/T27/T30/T40/T45/T50 Manufactured from S2 steel for strength
  • Transparent Insulating Shroud, certified for safe work up to 1,500VDC.  Should be used to isolate the engine compartment on Electric and Hybrid vehicles to prevent accidental contact with live components
    • Heavy Duty, fireproof PVC
    • Certified to IEC 61112 Class 0 (1,000VAC / 1,500VDC)
    • Dimensions: 1.3m x 1.0m x 0.8mm
  • Insulated Trim and Cable management tool set.  Used to safely remove vehicle trim and clipped components on Electric and Hybrid vehicles.
    • Four profile shapes to assist with removal of various trim clip styles.
    • Tested to 1,000 volts.
    • Supplied with storage pouch.

Go to Top