• Part no. ALB1000, ALB1100, ALB1150, ALB1200, ALB1250, ALB1200BT

    Brake Fluid Tester

    The World's Number 1 Brake Fluid Tester THE SILENT KILLER Brake fluid is designed with a high boiling point to withstand the extreme temperatures generated during braking. It has one major drawback - it absorbs moisture (it's Hygroscopic). The more moisture in the brake fluid, the lower the boiling point. This increases the risk of "brake fade": under heavy driving conditions the brake fluid boils, turns to vapour, and the brake pedal goes right to the floor with no braking action. This is known as "vapour lock". That's why brake fluid is known as the "silent killer". It's a safety critical item, but how many drivers ever ask to get their brake fluid checked? A brake fluid test could potentially save them from accidents, and for the garage, it's a largely ignored service opportunity. The Alba patented brake fluid tester is approved, recommended and sold by the world's leading Brake System & Brake Fluid manufacturers, as well as leading global aftermarket brands. The Alba Brake Fluid Tester works on the boiling point method; the only industry approved method that guarantees reliable, repeatable and accurate test results.
    Model Part No.MAx TempPrinter Enabled
    ALB1000200°C / 392°FNo
    ALB1100320°C / 608°FNo
    ALB1150320°C / 608°FStandard
    ALB1200320°C / 608°FStandard Included
    ALB1250320°C / 608°FBluetooth
    ALB1200BT320°C / 608°FBluetooth Included
  • Part no. ALB1200PTR, ALB1200PTRBT

    Printer

    For use with: ALB1150 & ALB1250 Part No. ALB1200PTR, ALB1200PTRBT

    • Printer unit for use with ALB1150 & ALB1250 and supplied as standard with the ALB1200 & ALB1200BT
    • Printed report shows: brake fluid tester serial number, battery voltage & test results in °C/°F
  • 1.5 BAR, 1.25 LITRE, 12V INC ALB30564B MVC CAP KIT

    Pressure brake bleeding is the only method approved by brake manufacturers • The UK's top selling Brake bleeder • Full fluid change in approx. 15 minutes by a single operator • Portable: operates off 12V supply (vehicle battery) • Fluid change capacity 1.25L • Float switch to ensure pump stops when new fluid level is low • No compressed air used, therefore no possibility of contamination of the fluid • Supplied with ALB30564B multi vehicle cap adaptor kit • Suitable for clutch bleed as well as brake bleed
  • 0.5 - 4.0 BAR, 6 LITRE, 12V

    Pressure bleeding is the only method approved by brake manufacturers
    • Full fluid change can be completed by a single operator in approx. 15 minutes
    • Heavy duty pump for longer life & continuous use
    • Fully adjustable digital pressure controller, 0.5 - 4.0 bar
    • No compressed air used, therefore no possibility of contamination of the fluid
    • Storage facility for fluid collection container & accessories (ALB30654B Cap Kit)
    • Suitable for use on car & LCV brake systems & also on HGV clutches
    • 6L fluid change capacity
    • Operates off 12V supply (vehicle battery)
    • Stainless steel construction
    • OEM approved
  • 0.5-4.0 BAR, 6 LITRE, 12V

    Pressure bleeding is the only method approved by brake manufacturers
    • Full fluid change can be completed by a single operator in approx. 15 minutes
    • Heavy duty pump for longer life & continuous use
    • Fully adjustable analogue pressure regulator, 0.5-4.0 bar
    • No compressed air used, therefore no possibility of contamination of the fluid
    • Storage facility for fluid collection container & accessories (ALB30654B Cap kit)
    • Suitable for use on Car & LCV brake systems & also on HGV clutches
    • 6L fluid change capacity
    • Operates off 12V supply (vehicle battery)
    • Stainless steel construction
     
  • Pressure bleeding is the only method approved by brake manufacturers
    • Full fluid change can be completed by a single operator in approx. 15 minutes
    • Heavy duty pump for longer life & continuous use
    • Fully adjustable analogue pressure regulator, 0.5-4.0 bar
    • No compressed air used, therefore no possibility of contamination of the fluid
    • Storage facility for fluid collection container & accessories (ALB30654B Cap kit)
    • Suitable for use on Car & LCV brake systems & also on HGV clutches
    • 6L fluid change capacity
    • 220V/240V 50HZ/60HZ mains operated
    • Stainless steel construction
  • 0.5-4.0 BAR, 6 LITRE, 12V

    Pressure bleeding is the only method approved by brake manufacturers
    • Full fluid change can be completed by a single operator in approx. 15 minutes
    • Heavy duty pump for longer life & continuous use
    • Fully adjustable digital pressure regulator, 0.5-4.0 bar
    • No compressed air used, therefore no possibility of contamination of the fluid
    • Storage facility for fluid collection container & accessories (ALB30654B Cap kit)
    • Suitable for use on Car & LCV brake systems & also on HGV clutches
    • 6L fluid change capacity
    • 12V charge input & 12V power outlet for use with other 12V powered tools
    • Operates off 12V internal power supply
    • Stainless steel construction
     
  • 0-3.0 BAR, 5 LITRE, 12V

    Pressure bleeding is the only method approved by brake manufacturers
    • Full fluid change can be completed by a single operator in approx. 15 minutes
    • Fully adjustable pressure regulator 0 - 3.0 bar
    • Draws fluid direct from 5L container
    • Auto cut-off prevents air entering system if fluid supply is interrupted
    • Portable unit with carry handle - only 9.0kg
    • Operates from 12V battery power supply
    • Heavy duty pump for long life
    • Coiled brake fluid delivery hose for ease of use and storage
    • Supplied complete with ALB30564B; multi-vehicle cap and European cap kit
    • OEM approved
     
    • Full fluid change can be completed by a single operator in approx. 15 minutes
    • Fully adjustable pressure regulator 0 – 3.0 bar
    • Draws fluid direct from 5L container
    • Auto cut-off prevents air entering system if fluid supply is interrupted
    • Portable unit with carry handle – only 9.0kg
    • 220V/240V 50HZ/60HZ mains operated
    • Heavy duty pump for long life
    • Coiled brake fluid delivery hose for ease of use and storage
    • Supplied complete with ALB30564B; multi-vehicle cap and European cap kit
    • OEM approved
  • FOR 20-60 LITRE DRUMS: 0.5-4.0 BAR, 12V

    • Designed specifically to extract fluid directly from a new drum of fluid
    • One person operation for cars, LCV & HGV clutches
    • Adjustable pressure up to 4 bar
    • 12V supply (car's own battery) so can be used in & outside workshop
    • Supplied with ALB30564B cap adapter kit (includes ALB592B Alba patented multi vehicle cap)
    • Waste fluid collection bottle with attaching chain
    • Stainless steel construction for long life
    • Brake fluid container (20 — 60L drum) can be secured directly on to trolley base
    • Low flow pressure switch for pump shut-off when fluid runs low to prevent air entering the system (drum not included)
       
    • Easy one-person operation
    • Simple hand pump operation to create pressure
    • Supplied with ALB30644 European cap adaptor with swivel elbow 42.8mm
    • 3L capacity
    • Quick release coupling, pressure relief valve, and 5 bar pressure gauge, suitable for use with all Alba caps.
    Spare Parts & Accessories
    • ALB30583 Multi Vehicle Cap for ALB30570
    • ALB30570-1 Replacement seal
    • ALB30570-2 Replacement pump assembly
    • Set of 6 specialist cap adaptors:
    Contents:
    • ALB560-11 (Applications: Nissan Qashquai 2009-, Primera, Radius, X-Trail, Renault Koleos)
    • ALB40014 (Applications: Nissan Pixo 2009-, Suzuki Alto / SX4)
    • ALB40015 (Applications: Nissan Micra 2011-, Nissan Kubistar, Cabstar, Urvan)
    • ALB30903 (Applications: Standard E20 thread Eurocap)
    • ALB30912 (Applications: Ford Fiesta 2010 onwards)
    • ALB40162 (Cross brand adaptor)
  • Part no. ALB30564A

    Cap Kit

    • Suitable for use with most presiire brake bleeders
    • Includes section of 11 different types/sizes of brake master cylinder caps
    • European cap adaptor
    • Multi-vehicle cap adaptor
    • 3x Chrysler / Jeep / GM cap adaptors
    • 5 x specialist cap adaptors covering BMW/Audi, Honda, Hyundai, Mitsubishi, Mazda, Nissan etc
    • 1 x specialist cap adaptor for Toyota / Lexus
    • Syringe for fluid level reset
    • Suitable for use with most pressure bleeders (including ALB560AB, ALB580A, ALB585A, ALB595A, ALB598A, ALB599A, ALB30570).
    • Contents: European cap adapter E20 thread
    • ALB592B patented multi-vehicle cap (3.-85mm diameter)
    • Brake bleed bottle
    • Syringe (for fluid level reset if required in master cylinder)
  • Part no. ALB40100

    Asian Cap Adaptor Set

    • Set of 5 specialist Brake master cylinder caps for Asian vehicles
    Contents:
    • ALB560-11 (Applications: Nissan Qashquai 2009-, Primera, Radius, X-Trail, Renault Koleos
    • ALB40014 (Applications: Nisan Pixo 2009-, Suzuki Alto / SX4)
    • ALB40015 (Applications: Nissan Micra 2011-, Nissan Kubistar, Cabstar, Irvan)
    • ALB560-12 (Applications: Ford Escape / Kuga)
    • ALB30644B (Applications: Standard E20 thread Euro Cap with swivel elbow)
  • Part no. ALB30583

    Multi Vehicle Cap

    • For use with ALB30583
    • Vacuum brake bleeder and refill bottles
    • 1L capacity
    • Uses standard workshop air supply
    • Unique rubber joint for fluid extraction (avoids leaks)
    • Removes fluid via bleed nipples to allow bleeding or entire fluid replacement
    • Refill bottles have magnetic bases for stability
     
    • Vacuum brake bleeder
    • 1L capacity
    • Uses standard workshop air supply
    • Unique rubber joint for fluid extraction (avoids leaks)
    • Removes fluid via bleed nipples to allow bleeding or entire fluid replacement
     
    • One man operation using standard workshop air supply
    • Quick, safe, clean and efficient
    • Draws fluid from bleed nipple so partial bleeding or full replacement possible
    • Uses standard workshop compressed air supply (70-170 psi) to generate vacuum
    • Supplied complete with Auto brake fluid refiller
    • For collection of brake fluid from the bleed nipples when bleeding brake systems
    • Chain to attach to Hub assembly, 300mm bleed hose with Universal bleed nipple connector
  • Unique Patented Model

    • Winds back brake caliper pistons to replace brake pads
    • Fits most European & Japanese vehicle models
    • Can be used with any 3/8" sq dr wind back adaptors, inc Universal type adaptors
    • Supplied with magnetic 2 pin drive adaptor
    • Suitable for both RH & LH rewind applications
    • Unique patented technology & design (patents applied for)
    • Designed & manufactured in the UK
  • Use with ALB30844

    • Air operated brake caliper piston rewind tool for both left & right handed threaded pistons
    • Winds back brake caliper pistons to replace brake pads
    • Suitable for most 3/8" sq dr wind back & pin type adaptors
    • Ideal for use with ALB30844 35 piece piston rewind tool adaptor set
    • Supplied with UK style airline adaptor (PCL type)
    • Uses normal workshop compressed air supply (90psi)
    • Winds back brake caliper pistons to replace brake pads
    • Fits most European & Japanese cars
    • Magnetic pads hold adaptors in place
    • Manual rewind tools for both RH & LH applications
    • Set includes RH & LH rewind tools & 17 popular adaptors
  • Use with ALB30844
    • Winds back brake caliper pistons to replace brake pads
    • Fits most European & Japanese cars
    • Magnetic pad holds adaptors in place
    • Tool for both left and right handed threaded pistons
    • Set includes 15 popular adaptors
    • Includes RH & LH rewind tool assemblies
    • Integral magnetic pads hold adaptors in place
    • Ideal for use with ALB30844 piston rewind tool adaptor set
    • Can be used with any standard 3/8" sq dr rewind adaptors
    • Suitable for both wind back & push back brake caliper pistons
    • Fits most European & Japanese cars
    • Double-ended caliper piston rewind tool - RH & LH applications in one tool
    • Essential tool for fast & easy brake pad replacement & caliper servicing
    • Suitable for use with any standard 3/8" sq dr rewind adaptors
    • Ideal for use with ALB30844 piston rewind adaptors set
    • Winds back brake caliper pistons to replace brake pads
    • Fits most European & Japanese cars
    • Magnetic pads hold adapters in place
    • Manual rewind tools for both RH & LH applications
    Set includes:
    • RH & LH Rewind Tools
    • 3 special brake calliper pentagon sockets
    • 2 allen keys 6mm & 7 mm
    • 2 pin punches for loosening the retaining pins on Mercedes-Benz & GM/Opel
    • 3 interchangeable retaining plates, for use with heavily worn brake pads and/or in cramped conditions
    • Lubricating oil for threads on caliper windback tool bolts
    • Set of 30 popular rewind adaptors & 5 common types of reaction plate
    • For use with any common 3/8" sq dr caliper piston rewind tool - either air or manually operated
    • Can be used on either RH or LH or Double-Ended rewind tools with 3/8" sq dr
    • Suitable for use on most European & Japanese cars
    Ideal for use with:
    • ALB30843 Air Operated Piston Rewind Tool
    • ALB30845 RH & LH Manual Piston Rewind Tools
    • ALB30990 Double-Ended Piston Rewind Tool
    • ALB40250 Pneumatic Piston Rewind Tool
    • Set of 6 rewind adaptors specifically for BMW/Mini models
    • For use with any 3/8" Sq Dr caliper rewind tool (air or manual)
    • Can be used with ALB30990, ALB30845, ALB30728, and ALB30783
    • Heavy duty double-ended Caliper Piston Rewind tool for RH & LH applications - 3/8" sq dr
    • Can be used with either standard 3/8" sq dr rewind apators or with universal adjustable adaptors
    • Adjustable 2 pin caliper piston rewind adaptor 2 pin dr
    • Ideal for restricted access applications
    • Fully adjustable - 100's of applications
    • Pins quickly & easily adjust from 15-36mm distance between pin centres, requires 3mm hex key to lock pins
    • Adjustable 3 pin caliper piston rewind adaptor 2 pin dr
    • Use in conjunction with appropriate EPB reset equipment where required
    • Adjustable 2 pin caliper piston rewind adaptor 3/8" sq dr
    • Fully adjustable - 100's of applications
    • Pins quickly & easily adjust from 15-35mm distance between pin centres, requires 3mm hex key to lock pins
    • Adjustable 3 pin caliper piston rewind adaptor 3/8" sq dr
    • Use in conjunction with appropriate electronic park brake reset equipment where required
    • Applications : BMW/E89/F10/F11/F12/F13/F18/F25/Mini, VAG A4/S4/A5/S5/A6/S6/A8/S8/Passat 3c/Passat CC/Tiguan, Renault Grande Scenic, Volvo S60/S80/V60/V70/XC60/XC70
    • Adjustable 2 pin caliper piston rewind adaptor 2 pin drive - ideal for restricted access applications
    • Fully adjustable - 100's of applications
    • Pins quickly & easily adjust from 15-35mm distance between pin centres, requires 3mm hex key to lock pins
    • Made of steel wire
    • Edge size 90 x 22mm, hook hole
    • Made of brass wire
    • Required on aluminium brake callipers to remove brake dust
    • Also suitable for cleaning work on all sensitive, metallic surfaces
    • Edge size 90 x 22mm, hook hole
    • Made of brass / steel wire
    • Brass cleaning brush required on aluminium brake callipers to remove brake dust
    • Also suitable for cleaning work on all sensitive, metallic surfaces
    • Edge size 90 x 22mm, hook hole
    • For removal of brake dust that has become firmly burnt onto brake callipers
    • Narrow file that is milled on 2 sides
    • Used to hold the brake caliper away from the hub when replacing brake pads
    • Brake caliper guide thread repair kit
    • Complete with a titanium coated core drill, tap & 10 threaded inserts
    • Suitable for Volkswagen Audi Group (90mm centre to centre); Opel/ Vauxhall (94mm centre to centre); Ford (105mm centre to centre)
  • Part no. ALB40230

    Brake Caliper Service Kit

    Set of specialised tools for caliper servicing:
    • Caliper cleaning file
    • Wire brush
    • 7 & 8mm caliper hex wrenches
    • 4 & 6mm parallel pin punches
    • 14 & 19mm pentagon caliper sockets
    • 10mm pentagon caliper bit
    • Brake pad lining gauge set
    Supplied in metal tin with foam insert
  • A specialist Technicians set of tools - for checking & measuring disc & pad thickness & for cleaning discs & calipers:
    • ALB40029 Digital brake disc measurement caliper (0-60mm)
    • ALB30602A Brake disc run-out gauge & magnetic base
    • ALB30992 Brake lining thickness guide tool
    • ALB40232 Brass Wire Brush for caliper cleaning
    • ALB30861 Wheel stud & disc cleaning set
  • Contains all the digital tools required for essential brake service measurement; an essential kit for all fast fit outlets, service centres & road safety checks.
    • ALB30596 Brake Discs & Pads
    • ALB30597 Brake Drums & Shoes
    • ALB30586 Brake Pad Thickness & Tyre Tread Depth
    • ALB30602 Brake Disc Runout
    • ALB30598 Digital Vernier Caliper
    • Supplied in a sturdy plastic case with foam inlay
    • Measurement range: 0 - 150mm (metric & imperial)
    • Resolution: 0.01mm
    • Accuracy: 0.01mm
    • LCD Display
    • Packaging: sturdy plastic case
    • Measurement range: 0 – 60mm (metric & imperial)
    • Resolution: 0.01mm
    • Accuracy:  0.04mm
    • LCD Display
    • Includes serial port connection for computer interface
    • Packaging: sturdy plastic case
    • Measurement Range: 0-300mm (metric and imperial)
    • Resolution: 0.01mm
    • Accuracy: 0.01mm
    • Sturdy plastic case
  • Part no. ALB30598

    Digital Vernier Caliper

    • Measurement range: 0-150mm (metric & imperial)
    • Resolution: 0.01mm
    • Accuracy: 0.03mm
    • Packaging: sturdy plastic case
    • ALB30598 Digital Vernier Caliper 0-150mm (metric & imperial)
    • ALB40029 Digital Brake Disc Caliper 0-60mm (metric & imperial)
    • Packaging: sturdy plastic case
    • ALB30598 Digital Vernier Caliper 0–150mm,  with ALB40157 Brake Disc Measuring Tool
    • Measures thickness of brake disc without having to remove the wheel
    • Packaging: sturdy plastic case
  • Part no. ALB30612

    Digital Micrometer 0-25mm

    • Two button digital micrometer with Auto power-off
    • Zero display in any position for relative & tolerance readings
    • Range: 0-25mm/0-1"
    • Resolution: 0.001mm/0.00005
    • Packaging: sturdy plastic case
    • Designed to measure the thickness of the brake discs, with the wheels still on the vehicle
    • Saves time – no need to remove the wheels or strip the brake first
    • Fits easily to most existing vernier calipers
    • Ideal for quickly checking remaining life of brake pad friction material
    • The blade is inserted between brake disc & brake pad
    • Sizes: Red 2 & 3mm; Yellow 4, 5 & 6mm; Green 8, 10 & 12mm
    • Brake pad spreader for use when servicing brakes
    • Single handed operation
    • Suitable for cars & light commercials
    • Spring loaded, quick release action
    • 5-60mm spread
    • Includes analogue dial indicator, special grip clamp & flexible shaft
    • Measurement  Range: 0 - 12.5mm (metric & imperial)
    • Resolution:  0.01mm
    • Accuracy: 0.01mm
    • Packaging: sturdy plastic case
    • An essential tool to retract caliper pistons prior to fitting new brake pads
    • Can be used with Tommy bar supplied or 1/2" square drive
    • Steel spreader plates open to maximum 65mm
    • Suitable for most calipers
    • Includes digital dial indicator, special grip clamp, and flexible shaft
    • Measurement  Range: 0 - 12.5mm (metric & imperial)
    • Resolution:  0.01mm
    • Accuracy: 0.01mm
    • Packaging: sturdy plastic case
    • DTI Gauge (0-10mm: 0.01 accuracy)
    • Magnetic Base for DTI Gauge
    • Micrometer (0-25mm)
    • Measurement Range: 0 - 25mm (metric & imperial)
    • Tolerance: +/- 0.05mm
    • Packaging: sturdy plastic case
    • Aid installation & removal of large & small T-slot anti-rattle washer found in drum brake assemblies
    • Large viewing cut-away to allow correct alignment of washer
    • Simple push & twist action
  • Part no. ALB40256

    Brake Adjustment Levers

    • For use on hydraulic brake systems
    • To adjust clearance between shoe & brake drum
  • Part no. ALB40253

    ABS Sensor Reamer Set

    • A specifically designed reamer set with 1/4” diameter ratchet, complete with 5 popular sized reamers
    • Chrome Vanadium and HSS steel
    • Removes dirt, dust & rust, ensuring a perfect fit
    • For:  VW/Audi/BMW/Fiat/Skoda/Seat/MB/Mazda/Ford/Toyota
  • Part no. ALB40254

    Brake Cylinder Hone Kit

    • Four cylinder-honing tools in one kit covering 18- 89mm cylinder bore
    • For honing and de-glazing car brake & clutch cylinders
    • Adjustable honing pressure & flexible drive shaft
  • Part no. ALB70035

    Line Clamp (Small)

    • Seals flexible brake & fuel lines
    • Smooth rounded edges to ensure no damage to the internal reinforcement of hydraulic brake lines
    • Non-conductive material
    • Size; 1/8” (3mm) - 5/16” (8mm)
  • Part no. ALB40228

    Brake Shoe Spring Pliers

    • Designed to aid the installation of brake shoe/brake drum springs
    • Suitable for most car and LCV applications
    • Length: 345mm
    • Designed to aid installation of brake shoe springs
    • Allows quick & easy removal & installation of the handbrake cable by compressing the retaining spring
    • For forming bends in brake & clutch pipe
    • For 4.75mm (3/16") diameter brake pipe
    • Ideal for use on vehicle or in restricted space
    • For forming bends in brake & clutch pipe
    • For 4.75mm (3/16") & 6.00mm (1/4") diameter brake pipe
    • Ideal for use on vehicle or in restricted space
  • Part no. ALB30746

    Brake Pipe Deburring Tool

    • For effectively de-burring brake pipes before fitting
    • Suitable for both inside & outside de-burring range
    • Pipe diameter range: 3/16” – 1 ½” OD
    • Telescopic action tube cutter
    • Ideal for cutting close to old flared pipe ends
    • Includes spare cutter wheel & foldaway de-burring blade
    • Pipe diameter range: 3–32mm (1/8” – 1  1/4”)
  • Part no. ALB30754

    Mini Tube Cutter (3-16mm)

    • Ideal for on-vehicle use (3-16mm/1/8"-5/8")
    • Ensures brake pipes are effectively deburred before fitting
    • Internal & external deburring capability
    • Size range: internal 3-12mm; external: 4-14mm
    • Suitable for copper, brass, steel & plastic pipes
    • Ideal for brake pipe repair work on or off the vehicle
  • Part no. ALB40268

    Knee Pad

    • Helps reduce pressure on the knees when working in kneeling position on a workshop floor
    • Washable, insulated & protects the operators knees from cold, hard, damp conditions, as commonly found  on workshop floors
    • Has an integral carrying handle, which can be used to hang the knee pad after use
    • Size: 480 x 320 x 35mm thick
    • Helps reduce pressure on the knees when working in kneeling position on a workshop floor
    • Washable, insulated & protects the operators knees from cold, hard, damp conditions, as commonly found  on workshop floors
    • Has an integral carrying handle, which can be used to hang the knee pad after use
    • Size: 480 x 320 x 35mm thick
  • Part no. ALB30915, ALB40117, ALB30688

    Workshop Brake Pipe Flaring Tool

    • Designed to be used with a workshop bench vice
    • Produces both Convex & Double Lap flares to SAE & DIN standard
    • Dial-a-size turret design for ease of use; From 4.75mm (3/16") to 12.00mm (1/2") [3/16" & 4.75mm included]
    • Lever cam action for quick flaring
    • Automatic punch extraction from flare
    • Screw clamp for accurate die alignment
    • All components available individually
    • Patented design for producing high quality flares on the vehicle
    • Creates 3/16" & 4.75mm SAE single & double flares
    • Lightweight & extremely easy to use
    • For mild steel, cupro nickle & copper tube
    • Use with two ratcheting spanners 10 & 16mm (not included)
    • Small & compact for easy use in confined areas
    • Same as ALB30893 but with 3/16" SAE only
    • Suitable for brake pipe flaring, directly on the vehicle
    • Ideal for brake pipes in steel, aluminium, copper and cupro-nickle
    • Punches and dies for 4.75mm (3/16") - 5mm -6mm (1/4") diameter included in kit
    • Suitable for both single and double lap flares for SAE and DIN flare forms
    • Also suitable for plastic sheathed brake lines
    • Uses hydraulic power to generate force for ease of use
    • Set includes a mini pipe cutter (3-16mm)
  • Kit contains: ALB30717 & ALB30879 Suitable for stainless steel brake pipes Lightweight, hand-held tool, ideal for working under car lifts when repairing brake pipes in-situ Quick release chuck for positive engagement of the flare punch Hydraulic power unit provides ultimate power for precision flaring - on the vehicle Creates SAE & DIN single & double flares - 4.75mm (3/16") pipe Supplied in moulded case including: ALB30723 Brake Pipe Pliers for 4.75mm pipe, ALB30746 Brake Pipe De-burring Tool, ALB30753 Brake Pipe Cutter, ALB30764 Corrosion Tool & ALB30879 6mm (1/4") Dies & Punches set. Also Available: ALB30707- Same as above but without 6mm (1/4") dies & punches ALB30880- Same as ALB30881 but without brake pipe pliers, de-burring tool, brake pipe cutter & corrosion tool ALB30659C- Same as above but without 6mm (1/4") dies & punches ALB30879- 6mm (1/4") dies & puches set
  • • Ideal for use on all fuel supply lines to stop the flow of fuel after disconnection
    • Suitable for use on flexi and solid fuel lines
    • Fits: 3/8”, 5/16”, 1/2” & Steel Banjo
    • For the powerful loosening of brake pipe fittings & bleeding nipples
    • Wrench can be used on fasteners up to 14mm without any problem
    • All fastener profiles are gripped in three places
    • Unique patented design
    • Allows for activating the bleed screws on the rear axles without removing the wheels
    • The open design of the wrench enables feeding through a silicon tube, e.g in a bleeding pump
    • Specially designed for VAG applications
    • Includes: 1x ratchet wrench 150mm with angled head, fine-tooth and reversible, 1 x bleed key SW11mm hex, 20mm short (VW Passat, Audi A4 etc) & 1 x bleed key SW11mmhex, 65mm long (VW Golf, Audi A3, Seat, Skoda etc).
  • Part no. ALB40068, ALB40069, ALB40070

    Brake Pipe Ratchet with Flex Head 8mm

    • Ideal for use on brake pipe fittings
    • Flexi-head for tight areas
    • Unique lock on wrench head ensures wrench won't slip off when in use
    • Manufactured from Chrome Vanadium steel
    ALB40068- Brake Pipe Ratchet with Flex Head 8mm ALB40069- Brake Pipe Ratchet with Flex Head 10mm ALB40070- Brake Pipe Ratchet with Flex Head 11mm
  • • High quality chrome vanadium • Sizes - 10x11, 13x14, 15x17mm • Supplied in protective carry pouch
    • Unique Patented ratcheting system for fast and easy removal of brake pipe nuts and inline nuts
    • Can be opened and closed to fit around the nut completely
    • The unique design ensures the greater pressure = greater grip - ideal for worn or rounded nuts
    • Double ended wrenches with flex head on each end
    • Sizes: 8x9mm, 10x11mm, 12x13mm, 14x15mm
  •   • Will easily remove even the toughest grime from brake discs, linings & calipers • Removable filter to recycle waste water/detergent; recycle function prolongs life of the brake          cleaning fluid • Tank capacity 40Ltrs • Fluid level indicator • Large diameter drain pan & removable filter grid • Adjustable offset telescope support arm (1260mm – 1420mm) for use under or adjacent to vehicle lifts • Heavy duty replaceable nylon brushes (offset & straight brushes)
    • Aluminium bell with steel core & 1/2" sq dr - for use with pneumatic impact wrenches
    • Corrosion between the wheel rim & the wheel hub is removed effectively
    • Torque values no longer distorted by a build up of corrosion
    • Complete with 1x abrasive cleaning disc - 150mm diameter
    Spares: ALB40241 pack of 3 x replacement abrasive cleaning discs - 150mm diameter
  • Part no. ALB40302

    0-25mm Micrometer

    • Range: 0-25mm
    • Display Type: Non-Digital
    • Carbide Measuring Faces
    • Clear Graduations on satin chrome finish
    • Hammerstone baked enamel finish
    • Ratchet Stop
    • Supplied in fitted plastic case
  • Part no. ALB40303

    MOT Sign Pack

    • 3 triangle
    • Diesel
    • CAT test
  • Part no. ALB40305

    25-50mm Micrometer

    • Range: 25-50mm
    • Display Type: Non-Digital
    • Carbide Measuring Faces
    • Clear Graduations on satin chrome finish
    • Hammertone baked enamel finish
    • Ratchet stop
    • When the reference rod is used as the measured workpiece, the "0" position can be corrected Supplied in fitted plastic case
  • Part no. ALB40307

    Roki Brass Brush

    The Roki wire brush range has been manufactured in co-operation with the automobile industry, designing for cleaning off clogged lining deposits when changing brake pads linings. This brush is very slim with crimped brass wire filling, made this way to prevent damage to sensitive brake areas during use. Heavy duty brake caliper brush with 2 rows of heavy duty brass wire fill and ergonomic handle
  • Part no. ALB40308

    Roki Steel Brush

    The Roki wire brush range has been manufactured in co-operation with the automobile industry, designed for cleaning off clogged lining deposits when changing brake pad linings. This brush is very slim with a heavy-duty straight stainless steel wire filling, made this way to prevent damage to sensitive brake areas during use. Heavy duty brake caliper brush with 2 rows of heavy duty steel wire and ergonomic handle
  • Part no. ALB40316

    Hub Cleaner Plastic

    • Plastic bell 1/2" sq dr - for use with pneumatic impact wrenches
    • Corrosion between the wheel rim and the wheel hub is removed effectively
    • Torque valves no longer distorted by a build up of corrosion
    • Complete with 1 abrasive cleaning disc - 150mm diameter
  • Part no. ALB40276B

    Digital Battery Tester

    ALBA40276B Battery Tester adopts currently the worlds most advanced conductance testing technology to easily, quickly and accurately measure the actual cold cranking amps capability of the vehicles starting battery, health state of the battery itself and common fault of the vehicle starting system and charging system, which can help maintenance personnel find the problem quickly and accurately
    • Tests antifreeze, battery acid and screenwash
    • Measurement shows within 1 second
    • Automatic Temperature Compensation
    • Supplied in handy pouch, pipette and calibration fluid
    • Automatic switch-off
    • Simple flip top mechanism
  • • Works on all types of glow plugs - any voltage • Displays Open & Short Circuit • Measures actual glow plug resistance for evaluation of the plug specification • Shrouded quality leads • Internal 9 volt battery & low warning indicator • Protected with oil resistant rubber shroud
  • Tests Antifreeze, battery acid, AdBlue, & screenwash Automatic temperature compensation Adjustable eyepiece for easy focusing Supplied in sturdy plastic case, complete with pipette & pouch
  • • Tests antifreeze, battery acid and screen wash • Supplied in sturdy plastic case • Complete with pipette and pouch • Adjustable eyepiece for easy focusing
  • Relay Tester for 4/5 pin relays (ALB30933)
    • Supplied with 2PCS adaptor set (ALB40212) to increase the range coverage of your existing relay tester
    • Supplied with 3PCS set of adaptors for shielded relays (ALB40213)
    ALB30933 Automotive Relay Tester
    • Quickly tests 4 & 5 pin electro-mechanical relays used on most cars
    • Checks for consistent functioning of relay contacts
    • Automatically indicates test results with a series of red & green performance lights
    • 12V power supply required
    ALB40212 Relay Adaptor Set 2PCS
    • Set of two adaptors to increase the range coverage of an existing relay tester
    • The adaptor plugs into the relay tester & the relay to be tested then plugs into the appropriate adaptor
    • For 4 & 5 pin relays as commonly used for fuel pumps & other powered components
    ALB40213 Relay Adaptor Set 2PCS
    • Set of three adaptors which allow an existing relay tester to test shielded relays
    • The shielded relay adaptor plugs into the same pin sockets as the normal relay & the shielded relay then plugs into the adaptor
    • Fits in any of the three 4 & 5 pin sockets on your relay tester
  • Part no. ALB40212

    Relay Adaptor Set 2pcs

    • Set of two adaptors to increase the range coverage of an existing relay tester
    • The adaptor plugs into the relay tester & the relay to be tested then plugs into the appropriate adaptor
    • For 4 & 5 pin relays as commonly used for fuel pumps and other powered components
  • Part no. ALB30933

    Automotive Relay Tester

    • Quickly tests 4 and 5 pin electro mechanical relays used on most cars • Checks for consistent functioning of relay contacts • Coil test voltage 9 volts • Automatically indicates test results with a series of red and green performance lights • 12v power supply required
  • Part no. ALB40213

    Relay Adaptor Set 3pcs

    • Set of 3 adaptors which allow an existing relay tester to test shielded relays
    • The shielded relay adaptor plugs into the same pin sockets as the normal relay and then the shielded relay then plugs into the adaptor
    • Fits into any of the three 4 & 5 pin sockets on the relay tester
  • Part no. ALB40214

    Relay Tester Master Set

    • Combination set of adaptors (ALB40212 + ALB40213)
    • For use with the existing relay tester (ALB30933 or equivalent)
    • Supplied in plastic storage case
    • Helps the technician test the integrity of EGR valves and other 12v solenoids and helps in the cleaning process for carbonised EGR valves
    • Variable frequency allows EGR valves to be cycled in low frequency mode, to ensure correct operation or to clean during the cyclic mode
    • In high frequency mode, the valve can be opened progressively, allowing more efficient manual cleaning
    • Because of the variable frequency feature, the tool can also be used to test a variety of other 12v solenoid type valves
    • 12v operated
    • Rotary frequency control
      Kit contents: EGR & solenoid valve tester, universal terminals for 1.5mm valve connection pins, universal terminals for 2.8mm valve connection pins, Dedicated 6 pin connector for Pierburg/Renault/GM/Nissan and Volvo Dedicated 5 pin connector for GM/Opel applications & dedicated 6 pin connector for Ford/Land Rover and Jaguar applications.  
    • An easy to use device which will confirm each EBS/ABS sensor is operational and effective.
    • By connecting to the sensor socket on each wheel, individual sensor faults can easily be identified.
    • Tests the exciter ring and the distance between the ring and sensor.
    • Quick, accurate and simple to use
    • Performs a complete test cycle in 15 seconds
    • Reduces down time for sensor related problems by up to 80%
    • The unit also tests the exciter ring and the distance between the ring and sensor
    Product kit contents: • Control unit • 1.6m high-spec sensor connector cable • Adaptor cable with crocodile clips for non-standard EBS plugs • 9v battery (supplied) • Supplied in watertight, sturdy carry case, for use in outdoor environments  
    •  CAT 111 1000v rated – safe to use on Hybrids
    • Unique plug-in IR thermometer attachment, with 8:1 distance ratio, range from -30 to +550
    • 48 Test Ranges, 18 Test functions
    • 1 Ms Peak Min/Max function for glitch capture
    •  Ms Pulse width for fuel injector on-time
    • 20 Amp Fused Test Range
    • Data Hold, Auto power Off +/- Trigger adjust
    • Also measures temp via K-type thermocouple
    • Waterproof to IP67 standards
    • Continuity: audible beep
    • Diode test
    • Backlit LCD display with 40 segment analogue bargraph
    • Hard storage case with protective holster for multimeter
    • Current clamp- 80Amps
    • Compatible with graphic meters. scopes and DMM's
    • Ideal for parasitic drain testing
    • Use for diagnostic analysis to generate current waveforms e.g. primary ignition coils, fuel injectors, fuel pumps, etc
    • 13mm jaw opening, clamps over most negative battery cables
    • Auto power off & low battery indication
    • AC Amps 0-20A, 80A (resolution 0.01A, for parasitic drain testing)
    • DC Amps 0-20A, 80A (resolution 0.01A, for parasitic drain testing)
    • Current Clamp – 400AMPS
    • Compatible with graphing meters, scopes & DMM’s
    • Can be used for testing starting & charging systems
    • Auto power off & low battery indication
    • Test Ranges: AC Amps 0-40A, 400A (resolution 0.1A)and DC Amps 0-40A, 400A (resolution 0.1A)
    • Compatible with graphing meters, scopes & DMM’s
    • Can be used for testing starting & charging systems
    • Zero adjust control
    • Jaw opening 54mm
    Test Range AC Amps 0-600A, or 0 - 1000A (resolution 0.1A) DC Amps 0-600A, or 0 - 1000A (resolution 0.1A)
    • Set of 2 probes for insulation piercing connection to cables
    • Robust plastic moulding suitable for high temperatures.
    • Protected tip to avoid shorting on earth Supplied with 4mm shrouded female connector for connection to standard multimeter cables.
    • Also available individually as ALB30784R Heavy Duty Wire Piercing clip (red) ALB30784B Heavy Duty Wire Piercing clip (black)
  • Part no. ALB30856

    Terminal Tool Kit 12pcs

    • Suitable for the removal of vehicle computer connectors and terminals.
    • This 12 piece kit has a general application for safe and fast removal of terminals on a wide range of vehicles.
    • Colour coded aluminium handles make for easy identification.
  • Part no. ALB30847

    Test Leads

    • 10amp test lead with 4mm banana clip connectors
    • Can be used with multimeters & other diagnostic equipment
    • One man operation
    • Pressurised leak testing 12v electric compressor, works off car battery
    • Supplied with a set of 3 unique expanding rubber adaptors to fit to create air-tight seal under the neck of the expansion tank and will work on the majority of European & Asian applications
    • 1.2bar pressure limiter
    • 0-2.5 bar pressure gauge
    • Pressure hose: 2m long
    • Power cord: 2m long
    • Weight: 3kg
    • Unique inflatable bladder sealing system provides universal coverage for cars & light commercials- no individual adaptors required
    • Suitable for system neck diameters up to 60mm
    • Helps to locate leaks from: Head Gaskets, Radiator & Heater Cores, Water Pumps & Hoses, Core Plugs & Engine Blocks
    • Check the cap pressure with 6 unique double ended adaptors supplied to test the most common automotive pressure caps
    ALB70800-96 - Replacement Bladder for ALB70889 kit (single)
    • Unique universal design of pressure test kit for vehicle cooling systems
    • Uses expanding rubber adaptors to create air-tight seal under the neck of the expansion bottle
    • Fits all applications with neck diameters 18-44mm
    • Can also be used on popular applications with traditional bayonet fitting caps
    • Visual display of pressure loss to indicate the pressure leaks
    • Will also indicate defective head gasket leaks
    • Selection of adaptors to fit popular European & Japanese vehicles, to enable testing of cooling system pressure caps
    • Can be used in conjunction with Alba cooling system Pressure Test kits: ALB30923 + 30924 + 40046
  • Part no. ALB30771

    Airvac Coolant Refiller

    • Fast & efficient refilling system with universal adaptor
    • Fits most radiator & header tanks due to unique cone adaptor
    • Integrated vacuum gauge
    • Eliminates bleeding, coolant spillage & wastage
    • Operates on shop air to generate full system vacuum and eliminate air locks
    • Allows for removal of plastic and/or metal self tightening hose clamps with diameters of 18mm—54mm
    • Double gear lock lever with wide deep gears for secure locking
    • Cable adjuster and multiple gear-lock provide accurate and secure locking for any clamp position within range
    • Pressure test kit for testing cooling system pressures
    • Aluminium system connector caps 7x, with quick connectors
    • Aluminium pressure pump including connecting hose & pressure relief valve
    • Applications include: DAF, Deutz, ERF, Iveco, MAN, Mercedes, Renault, Scania, Volvo
    • Pressure test kit for testing turbo system pressure and identifying leaks within the system
    • Set of 8x system connectors: 4x test and 4x closed
    • Diameter range: 55-94mm
    • Connectors have rough surface to allow for better grip within turbo hose end
    • Use with any standard pressure pump from the Alba pressure testing range or can be connected direct to compressed air system with a suitable pressure regulator
    • Produces vacuum or pressure at the turn of a switch
    • Use for one-person brake bleeding
    • One-finger trigger vacuum/pressure release
    • Includes durable, accurate diaphragm style compound pressure/vacuum gauge
    • Max. vacuum/pressure - 25 in Hg (85kPa)/30psi (207+kPa)
    Kit includes
    • Silverline elite hand vacuum/pressure pump: 50mm (2") compund gauge: rubber boot; 135ml fluid reservoir bottle: fluid transfer and storage lids; 2 x assorted adaptors & plugs for connecting to tubing & bleed nipples; 2 x 600mm (24") long connection tubes 6.4mm (1/4") ID & 3x short connection tubes.
    • Vacuum tester for performing a wide variety of engine & related test functions including: fuel pressure, ignition, transmission & emissions
    • Also suitable for brake & clutch bleeding on cars, motorcycles and commercial vehicles
    Kit Contains
    • Brass bodied vacuum pump and gauge - 0-30 in Hg; long and short vacuum hoses- 75mm (3") & 600mm (24"); fluid container; selection of hose connectors & selection of brake bleed nipple adaptors
    • Hand operated vacuum and pressure pump - fitted with bypass for dual operation
    • Use to test on or off
    • Test vacuum: from -1000mBar to 0mBar(-1.0Bar to 0Bar)
    • Test Pressure: From 0mBar to 1500mBar (0 to 1.5Bar)
    Kit Contains:
    • Long & short vacuum hoses- 75mm (3") & 600mm (24"); fluid container; selection of hose connectors & selection of brake bleed nipple adaptors
  • Part no. ALBGLD-40A

    GLD-40 Smoke Wizard

    The advanced smoke wizard GLD40 combines pressure and vacuum leak measurement for Evaporative Emission (EVAP) and general purpose leak detection in a compact design. Uses automotive system safe, OEM-approved UltraTraceUV dye smoke solution, the smoke that won't stink! To find the leak when the smoke is gone or when the leak(s) may be hidden and disassembly is required, use the included combination light to see the dye and pinpoint the exact leak location
  • Multifunction 12V/24V lithium starter, equipped with: - two USB outputs (1A-2,1A) to charge (power bank) electronic devices (tablets, smartphones, etc.), - high intensity LED lights with three function modes for fixed or emergency lighting. It uses high-efficiency LiPO lithium polymer cells that provide rapid and complete charging, constantly monitored by a series of LEDs. Compact and strong it is designed for the professional use. Protection against polarity reversal. Complete with starting cables, cigarette lighter plug and wall charge.
  • Electronic BATTERY MANAGER for total maintenance of WET, GEL, AGM, MF, PbCa, EFB and Li batteries at 12/24V and for support activities when intervening on vehicles in workshops, repair shops and car dealer premises. The innovative Power Stream technology guarantees better performance, up to 50% more than traditional battery chargers. 1.The Pulse Tronic technology guarantees optimal battery charging over 8 phases. 2. battery tests such as voltage at terminals, starting capacity (CCA) and operational check of the vehicle alternator; 3. recovery of sulphated or very discharged batteries, and recovery of optimal operation with periodic regeneration; 4. stable power supply source for battery changes (to protect the on-board electronics), for diagnostic activities (operation checks carried out on the vehicles), for keeping the batteries of display vehicles in showrooms operational; 5. vehicles start. Based on the SMPS (Switch Mode Power Supply) Technology.In case of black-outs or repetitive uses Doctor Charge 130 can set itself at the last settings carried out. Many protections available. Fit with PFC device.
  • ALB40295A DOCTOR CHARGE 50 230V 6V/12V/24V (Charger/starter) Electronic BATTERY MANAGER for total maintenance of WET, GEL, AGM, MF, SPIRAL, START-STOP batteries at 6/12/24V and for support activities when intervening on vehicles in workshops, repair shops and car dealer premises. The innovative Power Stream technology guarantees better performance, up to 50% more than traditional battery chargers. The Pulse Tronic technology guarantees optimal battery charging over 8 phases. Doctor Charge 50 carries out 5 functions: 1. automatic charge and maintenance of batteries with PULSE TRONIC technology, even in difficult environmental conditions (low temperatures); 2. battery tests such as voltage at terminals, starting capacity (CCA) and operational check of the vehicle alternator; 3. recovery of sulphated or very discharged batteries, and recovery of optimal operation with periodic regeneration; 4. stable power supply source for battery changes (to protect the on-board electronics), for diagnostic activities (operation checks carried out on the vehicles), for keeping the batteries of display vehicles in showrooms operational; 5. vehicles start aid. Based on the SMPS (Switch Mode Power Supply) Technology. In case of black-outs or repetitive uses Doctor Charge 50 can set itself at the last settings carried out, furthermore the cables can be calibrated according to their type (different lengths and/or sections). Many protections available. Fit with PFC device.
  • Part no. ALB40294A

    Flashstart 700

    • 12V battery less starter (ultra-condensers technology).
    • It starts a large fleet of vehicles even at low temperatures. No maintenance require: Flash Start exploits the residual battery power to start the vehicle.
    • It can be charged via USB or a 12V cigarette lighter socket.
    • GLOW function for starting diesel engines at low temperatures.
    • Protection against short-circuits and polarity reversal.
    • Supplied with a charger cable with cigarette lighter plug (12V) and a hexagonal wrench (for the battery terminals on-board the vehicle).
  • Finds squeaks & rattles electronically - whilst vehicle is under load
    • Improves workshop efficiency, revenues, customer satisfaction & saves time
    • Listen to 6 under chassis locations at one time - all in one road test
    • Hear noises that cannot be duplicated in the workshop
    • Essential for saving needless warranty expense
    • Supplied with headphones, control unit, noise wand & 6 pick-ups
  • Professional diagnostic tool using non-intrusive ultrasound to inspect  & isolate difficult to find sounds non-audible to the human ear
    • Sound is converted to audible level & LED bargraph indicates intensity & direction of sound
    • Not affected by ambient noise - eg radios, voices, wind, traffic noise etc
    • Contains: transmitter & receiver, headphones, aluminium contact probe, aluminium air/acoustic probe & storage case

Go to Top