• Part no. ALB1000, ALB1100, ALB1150, ALB1200, ALB1250, ALB1200BT

    Brake Fluid Tester

    £560.00
    The World's Number 1 Brake Fluid Tester THE SILENT KILLER Brake fluid is designed with a high boiling point to withstand the extreme temperatures generated during braking. It has one major drawback - it absorbs moisture (it's Hygroscopic). The more moisture in the brake fluid, the lower the boiling point. This increases the risk of "brake fade": under heavy driving conditions the brake fluid boils, turns to vapour, and the brake pedal goes right to the floor with no braking action. This is known as "vapour lock". That's why brake fluid is known as the "silent killer". It's a safety critical item, but how many drivers ever ask to get their brake fluid checked? A brake fluid test could potentially save them from accidents, and for the garage, it's a largely ignored service opportunity. The Alba patented brake fluid tester is approved, recommended and sold by the world's leading Brake System & Brake Fluid manufacturers, as well as leading global aftermarket brands. The Alba Brake Fluid Tester works on the boiling point method; the only industry approved method that guarantees reliable, repeatable and accurate test results.
  • Part no. ALB1200PTR, ALB1200PTRBT

    Printer

    For use with: ALB1150 & ALB1250 Part No. ALB1200PTR, ALB1200PTRBT

    • Printer unit for use with ALB1150 & ALB1250 and supplied as standard with the ALB1200 & ALB1200BT
    • Printed report shows: brake fluid tester serial number, battery voltage & test results in °C/°F
    Model Part No.MAx TempPrinter Enabled
    ALB1000200°C / 392°FNo
    ALB1100320°C / 608°FNo
    ALB1150320°C / 608°FStandard
    ALB1200320°C / 608°FStandard Included
    ALB1250320°C / 608°FBluetooth
    ALB1200BT320°C / 608°FBluetooth Included
  • 0-3.0 BAR, 5 LITRE, 12V

    Pressure bleeding is the only method approved by brake manufacturers
    • Full fluid change can be completed by a single operator in approx. 15 minutes
    • Fully adjustable pressure regulator 0 - 3.0 bar
    • Draws fluid direct from 5L container
    • Auto cut-off prevents air entering system if fluid supply is interrupted
    • Portable unit with carry handle - only 9.0kg
    • Operates from 12V battery power supply
    • Heavy duty pump for long life
    • Coiled brake fluid delivery hose for ease of use and storage
    • Supplied complete with ALB30564B; multi-vehicle cap and European cap kit
    • OEM approved
     
  • 0.5 - 4.0 BAR, 6 LITRE, 12V

    Pressure bleeding is the only method approved by brake manufacturers
    • Full fluid change can be completed by a single operator in approx. 15 minutes
    • Heavy duty pump for longer life & continuous use
    • Fully adjustable digital pressure controller, 0.5 - 4.0 bar
    • No compressed air used, therefore no possibility of contamination of the fluid
    • Storage facility for fluid collection container & accessories (ALB30654B Cap Kit)
    • Suitable for use on car & LCV brake systems & also on HGV clutches
    • 6L fluid change capacity
    • Operates off 12V supply (vehicle battery)
    • Stainless steel construction
    • OEM approved
  • 0.5-4.0 BAR, 6 LITRE, 12V

    Pressure bleeding is the only method approved by brake manufacturers
    • Full fluid change can be completed by a single operator in approx. 15 minutes
    • Heavy duty pump for longer life & continuous use
    • Fully adjustable digital pressure regulator, 0.5-4.0 bar
    • No compressed air used, therefore no possibility of contamination of the fluid
    • Storage facility for fluid collection container & accessories (ALB30654B Cap kit)
    • Suitable for use on Car & LCV brake systems & also on HGV clutches
    • 6L fluid change capacity
    • 12V charge input & 12V power outlet for use with other 12V powered tools
    • Operates off 12V internal power supply
    • Stainless steel construction
     
  • 1.5 BAR, 1.25 LITRE, 12V INC ALB30564B MVC CAP KIT

    Pressure brake bleeding is the only method approved by brake manufacturers • The UK's top selling Brake bleeder • Full fluid change in approx. 15 minutes by a single operator • Portable: operates off 12V supply (vehicle battery) • Fluid change capacity 1.25L • Float switch to ensure pump stops when new fluid level is low • No compressed air used, therefore no possibility of contamination of the fluid • Supplied with ALB30564B multi vehicle cap adaptor kit • Suitable for clutch bleed as well as brake bleed
  • 0.5-4.0 BAR, 6 LITRE, 12V

    Pressure bleeding is the only method approved by brake manufacturers
    • Full fluid change can be completed by a single operator in approx. 15 minutes
    • Heavy duty pump for longer life & continuous use
    • Fully adjustable analogue pressure regulator, 0.5-4.0 bar
    • No compressed air used, therefore no possibility of contamination of the fluid
    • Storage facility for fluid collection container & accessories (ALB30654B Cap kit)
    • Suitable for use on Car & LCV brake systems & also on HGV clutches
    • 6L fluid change capacity
    • Operates off 12V supply (vehicle battery)
    • Stainless steel construction
     
    • Detect the invisible inside parts of machinery (such as cars) to check whether it is working normally.
  • Part no. ALB40318

    Lugdriller

    • Removes the most difficult locking lug nuts • Professional kit : made of solid material that can work on the hardest lugs Professional kit : made of solid material that can work on the hardest lugs • Very easy and quick to use : 4 8 minutes per wheel only!  
  • This extractor allows to dismantle Common rail or Piezo injector types for Denso, Siemens, Bosch & Delphi brands from 1999 to 2017.
  • Part no. ALB40315

    Disposable Visors

    • Non-medical
    • Disposable Visor Specifications:
    •  One size fits all
    • Head size 49cm to 64cm
    • Screen dimensions 16.7cm x 21cm
    • Cardboard headpiece – fully recyclable – 500um white folding box-board
    • Anti-mist film – 71um poly
  • Part no. KN-95

    KN-95 Mask

    • FFP2 KN95 Mask (25 box)
    • Filtration effy>95%
  • Part no. ALB40311

    Tack Lifter

    • Designed for lifting small nails and pins.
  • Part no. ALB40303

    MOT Sign Pack

    • 3 triangle
    • Diesel
    • CAT test
    • -Electric hydraulic drive , 24V safety voltage control, good security.
    • The base is mounted with four universal wheels for easy movement of the lift.
    • The handle can be adjusted to the level facilitate the lifting of the power battery
    • With minimum and height limits
    • There are many M10 threaded holes on the surface of the platform to facilitate the installation of positioning kits, suitable for different types of vehicles.
    • Sliding blocks adopt oil free super-wearable materials.
    • The sliding platform can be moved 40mm in-plane.
    • With hydraulic lock and mechanical dual-gear safety-claw lock double safety device, adversely, safe and reliable.
    • Split table and tapped top plate
    • Double safety guarantee: hydraulic and mechanical safety lock
    • Providing the lowest and highest height limit to ensure safe operation
    • With a platform leaned all round and moving horizontally, it is a good helper for the installation and maintenance of vehicle battery or engine
    • It's easy to move the platform with hydraulic lifting trailer
    • Capable of lifting vehicle battery / engine within 1200kg
    • Equipped with adjusting handle to make operation more convenient
    • Thanks to the gimbaled level, the users could monitor the real-time horizontal position of the platform
  • Part no. ALB40292A

    EV Battery Lift (1T)

    ALB40292A; suitable for lifting electric vehicle batteries weighing max1000kg. Suitable for use in installation & dismantling of new electric vehicle batteries. 4 castors with brakes Adjustable lowering speed Tilted platform design ensures secure fit to battery pack
  • Multifunction 12V/24V lithium starter, equipped with: - two USB outputs (1A-2,1A) to charge (power bank) electronic devices (tablets, smartphones, etc.), - high intensity LED lights with three function modes for fixed or emergency lighting. It uses high-efficiency LiPO lithium polymer cells that provide rapid and complete charging, constantly monitored by a series of LEDs. Compact and strong it is designed for the professional use. Protection against polarity reversal. Complete with starting cables, cigarette lighter plug and wall charge.
  • ALB40295A DOCTOR CHARGE 50 230V 6V/12V/24V (Charger/starter) Electronic BATTERY MANAGER for total maintenance of WET, GEL, AGM, MF, SPIRAL, START-STOP batteries at 6/12/24V and for support activities when intervening on vehicles in workshops, repair shops and car dealer premises. The innovative Power Stream technology guarantees better performance, up to 50% more than traditional battery chargers. The Pulse Tronic technology guarantees optimal battery charging over 8 phases. Doctor Charge 50 carries out 5 functions: 1. automatic charge and maintenance of batteries with PULSE TRONIC technology, even in difficult environmental conditions (low temperatures); 2. battery tests such as voltage at terminals, starting capacity (CCA) and operational check of the vehicle alternator; 3. recovery of sulphated or very discharged batteries, and recovery of optimal operation with periodic regeneration; 4. stable power supply source for battery changes (to protect the on-board electronics), for diagnostic activities (operation checks carried out on the vehicles), for keeping the batteries of display vehicles in showrooms operational; 5. vehicles start aid. Based on the SMPS (Switch Mode Power Supply) Technology. In case of black-outs or repetitive uses Doctor Charge 50 can set itself at the last settings carried out, furthermore the cables can be calibrated according to their type (different lengths and/or sections). Many protections available. Fit with PFC device.
  • Part no. ALB40294A

    Flashstart 700

    • 12V battery less starter (ultra-condensers technology).
    • It starts a large fleet of vehicles even at low temperatures. No maintenance require: Flash Start exploits the residual battery power to start the vehicle.
    • It can be charged via USB or a 12V cigarette lighter socket.
    • GLOW function for starting diesel engines at low temperatures.
    • Protection against short-circuits and polarity reversal.
    • Supplied with a charger cable with cigarette lighter plug (12V) and a hexagonal wrench (for the battery terminals on-board the vehicle).
  • Part no. WF80-P

    Alba Safety Trainer

    • Suede upper
    • Steel toe cap
    • Dual density polyurethane sole
    • Penetration resistant midsole
    • Oil resistant sole
    • Sizes: 8-11 in stock, other sizes available to order
  • Part no. WF70-P

    Alba Safety Boot

    • Suede upper
    • Steel toe cap
    • Dual density polyurethane sole
    • Penetration resistant midsole
    • Oil resistant sole
    • Sizes 8-11 in stock, other sizes available to order
    • Black full grain leather
    • Semi Goodyear Welt / Cemented Rubber
    • Oil & Acid Resistant
    • Steel toe cap
    • Steel Eyelets/Steel Hooks
    • Sizes 8-11 in stock, other sizes available to order
  • Electronic BATTERY MANAGER for total maintenance of WET, GEL, AGM, MF, PbCa, EFB and Li batteries at 12/24V and for support activities when intervening on vehicles in workshops, repair shops and car dealer premises. The innovative Power Stream technology guarantees better performance, up to 50% more than traditional battery chargers. The Pulse Tronic technology guarantees optimal battery charging over 8 phases. 1D.oacutotor mChaatircg ceh 1a3rg0e c aarnrdie ms aoiuntt e5n faunncceti oonf sb:atteries with PULSE TRONIC technology, even in difficult environmental conditions (low temperatures); 2. battery tests such as voltage at terminals, starting capacity (CCA) and operational check of the vehicle alternator; 3. recovery of sulphated or very discharged batteries, and recovery of optimal operation with periodic regeneration; 4. stable power supply source for battery changes (to protect the on-board electronics), for diagnostic activities (operation checks carried out on the vehicles), for keeping the batteries of display vehicles in showrooms operational; 5. vehicles start. Based on the SMPS (Switch Mode Power Supply) Technology.In case of black-outs or repetitive uses Doctor Charge 130 can set itself at the last settings carried out. Many protections available. Fit with PFC device.
    • Provides additional support for strut assemblies when held in strut vice
    • For high compression springs (ie close coils) as commonly found on Honda, Toyota etc
    • For Mercedes A, B, C, & E models
    • Special top bracket and lower jaw
    • Set of 6 specialist cap adaptors:
    Contents:
    • ALB560-11 (Applications: Nissan Qashquai 2009-, Primera, Radius, X-Trail, Renault Koleos)
    • ALB40014 (Applications: Nissan Pixo 2009-, Suzuki Alto / SX4)
    • ALB40015 (Applications: Nissan Micra 2011-, Nissan Kubistar, Cabstar, Urvan)
    • ALB30903 (Applications: Standard E20 thread Eurocap)
    • ALB30912 (Applications: Ford Fiesta 2010 onwards)
    • ALB40162 (Cross brand adaptor)
  • Part no. ALB40100

    Asian Cap Adaptor Set

    • Set of 5 specialist Brake master cylinder caps for Asian vehicles
    Contents:
    • ALB560-11 (Applications: Nissan Qashquai 2009-, Primera, Radius, X-Trail, Renault Koleos
    • ALB40014 (Applications: Nisan Pixo 2009-, Suzuki Alto / SX4)
    • ALB40015 (Applications: Nissan Micra 2011-, Nissan Kubistar, Cabstar, Irvan)
    • ALB560-12 (Applications: Ford Escape / Kuga)
    • ALB30644B (Applications: Standard E20 thread Euro Cap with swivel elbow)
  • Part no. ALB40025A ALB40026A ALB40015A

    Trolley Jacks

    • A range of High Quality Trolley Jacks, with additional built-in safety features:
    • Multi-position ergonomic handle with rubber comfort grip
    • Low noise Polyamide Wheels (steel wheels on 6Tonne model)
    • Tools holding tray on all models
    • Food Pedal for fast approaching lift to load height
    • "Dead man" safety lowering control system
    • Safety overload & hydraulic stroke limitation
    • Made in EU - manufactured to EN1494 European standards.
      2 Tonnes: ALB40025A 3 Tonnes: ALB40026A 6 Tonnes: ALB40015A
    • Easy one-person operation
    • Simple hand pump operation to create pressure
    • Supplied with ALB30644 European cap adaptor with swivel elbow 42.8mm
    • 3L capacity
    • Quick release coupling, pressure relief valve, and 5 bar pressure gauge, suitable for use with all Alba caps.
    Spare Parts & Accessories
    • ALB30583 Multi Vehicle Cap for ALB30570
    • ALB30570-1 Replacement seal
    • ALB30570-2 Replacement pump assembly
    • Suitable for use with most pressure bleeders (including ALB560AB, ALB580A, ALB585A, ALB595A, ALB598A, ALB599A, ALB30570).
    • Contents: European cap adapter E20 thread
    • ALB592B patented multi-vehicle cap (3.-85mm diameter)
    • Brake bleed bottle
    • Syringe (for fluid level reset if required in master cylinder)
  • Part no. ALB30564A

    Cap Kit

    • Suitable for use with most presiire brake bleeders
    • Includes section of 11 different types/sizes of brake master cylinder caps
    • European cap adaptor
    • Multi-vehicle cap adaptor
    • 3x Chrysler / Jeep / GM cap adaptors
    • 5 x specialist cap adaptors covering BMW/Audi, Honda, Hyundai, Mitsubishi, Mazda, Nissan etc
    • 1 x specialist cap adaptor for Toyota / Lexus
    • Syringe for fluid level reset
    • Measurement Range: 0-300mm (metric and imperial)
    • Resolution: 0.01mm
    • Accuracy: 0.01mm
    • Sturdy plastic case
    • Excellent insulation and comfortable handling in cold conditions
    • Pack Qty: 12pairs
    • For handling of air conditioning components and refrigerants, where there is a risk of skin contact, it is recommended to use 80-400 in combination with 92-605 disposable chemical resistant gloves
  • Part no. 70-114

    Kevlar Sleeve

    • Thermal resistance with superior mechanical protection and cut-resistance
    • Size: 356mm
    • Pack Qty: 12 sleeves
    • Excellent chemical protection with a new level of grip, fit and comfort
    • Pack Qty: 12 pairs

Go to Top